Buy S-32-SWX Cam Follower Needle part by Rbc Bearings Incorporated

Part Number: S-32-SWX

Alternate P/N: S32SWX

Manufacturer: rbc bearings incorporated

NSN: 3110-01-006-9130

NIIN: 010069130

Item Name : cam follower needle

CAGE Code: 51588

FSC: 3110 Bearings Antifriction Unmounted

INC Code: 00040

Country: USA

NCB Code: 01

FSG: 31 Bearings

We've received your request for S-32-SWX (described as Cam Follower Needle), manufactured by Rbc Bearings Incorporated with CAGE code 51588. This part is registered under NSN 3110-01-006-9130, classified in FSG 31 Bearings / FSC 3110 Bearings Antifriction Unmounted. Our verification process will confirm traceability through supporting identifiers including NIIN 01-006-9130, NCB code 01 (origin: USA), and INC 00040. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your S-32-SWX requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for S-32-SWX

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part S-32-SWX, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number S-32-SWX with NSN 3110-01-006-9130, 3110010069130

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3110-01-006-9130 Item PartTypeName: CAM FOLLOWER,NEEDLE BEARING	3110	010069130	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
3021244	5	9	5

Characteristics Data of NSN 3110-01-006-9130, 3110010069130

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	2A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.5000 INCHES MINIMUM
ABHP	OVERALL LENGTH	1.6860 INCHES MAXIMUM
ADGA	OVERALL OUTSIDE DIAMETER	1.0000 INCHES MINIMUM AND 1.0010 INCHES MAXIMUM
AGRJ	STUD DIAMETER	0.4375 INCHES MAXIMUM
AGVT	OUTER RING WIDTH	0.6200 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM
AGXF	STUD LENGTH	0.9850 INCHES MINIMUM AND 1.0150 INCHES MAXIMUM
AGYJ	SEAL QUANTITY	2
AGYW	BEARING SEAL TYPE	CONTACT
CMLP	THREAD QUANTITY PER INCH	20
CQJX	NOMINAL THREAD SIZE	0.438 INCHES
FEAT	SPECIAL FEATURES	ECCENTRIC BUSHING,GREASE FITTING IN STUD END,0.250 IN. HEX SOCKET IN BEARING END
LBMA	LUBRICATION MATERIAL	GREASE
LMDC	LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION	MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
MATT	MATERIAL	PLASTIC POLYAMIDE SEAL
MATT	MATERIAL	STEEL COMP E52100 INNER RING
MATT	MATERIAL	STEEL COMP E52100 ROLLER
MATT	MATERIAL	STEEL INNER RACE
MATT	MATERIAL	STEEL OUTER RING
MATT	MATERIAL	STEEL STUD
THSD	THREAD SERIES DESIGNATOR	UNF

Schedule B & Trade

End Use : 21180	Industrial machines, other
Schedule B : 8482400000 (NAICS 332991)	Needle roller bearings
SITC : 74640	Needle roller bearings

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	Sf9---n
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	114800 - Bearing, roller, thrust
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	742 - Bearings