Buy K888508-1SUB3 Capacitor Fixed Mic part by Rca Ltd

Part Number:  K888508-1SUB3
Alternate P/N:  K8885081SUB3
Manufacturer:  rca ltd
NIIN:  008085235
Item Name :  capacitor fixed mic
CAGE Code:  21921
INC Code:  00005
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for K888508-1SUB3 (described as Capacitor Fixed Mic), manufactured by Rca Ltd with CAGE code 21921. This part is registered under NSN 5910-00-808-5235, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5910 Capacitors. Our verification process will confirm traceability through supporting identifiers including NIIN 00-808-5235, NCB code 00 (origin: USA), and INC 00005. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your K888508-1SUB3 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for K888508-1SUB3

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part K888508-1SUB3, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number K888508-1SUB3 with NSN 5910-00-808-5235, 5910008085235

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5910-00-808-5235

Item PartTypeName:

CAPACITOR,FIXED,MICA DIELECTRIC

59100080852350P
CIICHCCESDPMICCriticalityENAC
U S0
Part NumberISCRNVCRNCCHCCMSDSSADC
2922-61500G4-501M38E

Characteristics Data of NSN 5910-00-808-5235, 5910008085235

MRCCriteriaCharacteristic
AARGRELIABILITY INDICATORNOT ESTABLISHED
AEBZSCHEMATIC DIAGRAM DESIGNATORELECTRODE(S) GROUNDED TO CASE,W/GND TERMINAL
AKEJMOUNTING FACILITY SCREW THREAD SERIES DESIGNATORUNC
CQBFINSULATION RESISTANCE AT MAXIMUM OPERATING TEMP15000.0 MEGOHMS
CRDNTEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS-20.0 TO 100.0 SINGLE SECTION
CRTLCRITICALITY CODE JUSTIFICATIONCWJK
CRTPTOLERANCE RANGE PER SECTION-2.00 TO 2.00 PERCENT SINGLE SECTION
CWJKCASE MATERIALMETAL
TESTTEST DATA DOCUMENT81349-MIL-C-10950/2 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLEC
AAQLBODY STYLEBUTTON TYPE,W/THD MTG HOLE/STUD
ABPMBODY DIAMETER0.450 INCHES NOMINAL
ADAQBODY LENGTH0.380 INCHES NOMINAL
AXHRMOUNTING FACILITY TYPE AND QUANTITY1 THREADED MOUNTING HOLES
CQBQCAPACITANCE VALUE PER SECTION510.000 PICOFARADS SINGLE SECTION
CQJJNONDERATED OPERATING TEMP-55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM
CQJXNOMINAL THREAD SIZE0.099 INCHES
CQWMNONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION500.0 DC SINGLE SECTION
CWPKINSULATION RESISTANCE AT REFERENCE TEMP50000.0 MEGOHMS
CWPMDISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT0.00075
CWSGTERMINAL SURFACE TREATMENTSILVER
TTQYTERMINAL TYPE AND QUANTITY2 TAB,SOLDER LUG

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8532290020 (NAICS 334416) Fixed capacitors, mica dielectric, nesoi
SITC : 77867 Fixed capacitors, n.E.S.

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature but does have other critical featur (s) such as tolerance, fit restrictions or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC S - Item contains silver.

NSN Management Codes

AAC V
Classification Control U
MGMT_CTL Q22tex-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061400 - Condensers/parts noi/capacitors
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top