Buy 7-1006 Counter Electrical part by Redington Counters Inc

Part Number:  7-1006
Alternate P/N:  71006
Manufacturer:  redington counters inc
NIIN:  007274140
Item Name :  counter electrical
CAGE Code:  28292
INC Code:  16412
Country:  USA
NCB Code:  00
FSG:  66 Instruments And Laboratory Equipment

We've received your request for 7-1006 (described as Counter Electrical), manufactured by Redington Counters Inc with CAGE code 28292. This part is registered under NSN 6680-00-727-4140, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6680 Liquid And Gas Flow Liquid Level And Mechanical Motion Measuring Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 00-727-4140, NCB code 00 (origin: USA), and INC 16412. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 7-1006 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 7-1006

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 7-1006, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6680-00-727-4140, 6680007274140

MRCCriteriaCharacteristic
STYLStyle DesignatorELECTRICAL CASED
AFDVLongest Vertical Distance Between Mounting Centers1.350 INCHES MINIMUM AND 3.360 INCHES MAXIMUM
AFDWShortest Vertical Distance Between Mounting Centers0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM
AFDSLongest Horizontal Distance Between Mounting Centers3.307 INCHES MINIMUM AND 3.317 INCHES MAXIMUM
CSWTNumeral Readout00000 MINIMUM SINGLE REGISTER SINGLE TIER AND 99999 MAXIMUM SINGLE REGISTER SINGLE TIER
BCNXMounting Type For Which DesignedPANEL REAR SINGLE REGISTER SINGLE TIER
HUESColorBLACK SINGLE REGISTER SINGLE TIER FIGURE BACKGROUND
TTQYTerminal Type And Quantity2 WIRE LEAD
AXHRMounting Facility Type And Quantity8 UNTHREADED HOLE
AXEDRegister FunctionADD SINGLE REGISTER SINGLE TIER
ABMKOverall Width1.730 INCHES MINIMUM AND 1.740 INCHES MAXIMUM
CSWSNumeral Display MethodDRUM
ANREMaximum Count Rate1000.0 PER MINUTE SINGLE REGISTER SINGLE TIER
ANRLMounting Arrangement StyleEIGHT POSITION STAGGERED
ANQDRegister Quantity1
ANQTFigure Height0.185 INCHES MINIMUM SINGLE REGISTER SINGLE TIER AND 0.195 INCHES MAXIMUM SINGLE REGISTER SINGLE TIER
MRCDecoded RequirementClear Text Reply
CSBHVoltage In Volts And Current Type115.0 DC
ANQSFigure Quantity Per Register6 SINGLE REGISTER SINGLE TIER
ABHPOverall Length3.890 INCHES MINIMUM AND 3.950 INCHES MAXIMUM
AFDTShortest Horizontal Distance Between Mounting Centers3.225 INCHES MINIMUM AND 3.235 INCHES MAXIMUM
ABKWOverall Height2.500 INCHES MINIMUM AND 2.525 INCHES MAXIMUM
HUESColorWHITE SINGLE REGISTER SINGLE TIER FIGURE
AXECRegister Reset MethodTOTAL COUNTER MANUAL SINGLE REGISTER SINGLE TIER

Schedule B & Trade

End Use : 21160 Measuring, testing, control instruments
Schedule B : 9029100000 (NAICS 334514) Revolution counters, production counters, taximeters, odometers, pedometers and the like
SITC : 87321 Revolution counters, production counters, taximeters, odometers, pedometers and the like

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Sf9sx-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 133300 - Machinery/machines noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 653 - Musical instruments

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top