Buy DR30CB303G Capacitor Fixed Cer part by Republic Electronics Corp

Part Number:  DR30CB303G
Manufacturer:  republic electronics corp
NIIN:  013259370
Item Name :  capacitor fixed cer
CAGE Code:  93958
INC Code:  00007
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for DR30CB303G (described as Capacitor Fixed Cer), manufactured by Republic Electronics Corp with CAGE code 93958. This part is registered under NSN 5910-01-325-9370, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5910 Capacitors. Our verification process will confirm traceability through supporting identifiers including NIIN 01-325-9370, NCB code 01 (origin: USA), and INC 00007. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your DR30CB303G requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for DR30CB303G

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part DR30CB303G, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number DR30CB303G with NSN 5910-01-325-9370, 5910013259370

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5910-01-325-9370

Item PartTypeName:

CAPACITOR,FIXED,CERAMIC DIELECTR

59100132593700P
CIICHCCESDPMICCriticalityENAC
U A0
Part NumberISCRNVCRNCCHCCMSDSSADC
77C719247P006527

Characteristics Data of NSN 5910-01-325-9370, 5910013259370

MRCCriteriaCharacteristic
AAQLBODY STYLEW/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
ABJTTERMINAL LENGTH1.125 INCHES MINIMUM
ADAQBODY LENGTH0.300 INCHES MAXIMUM
ADAUBODY HEIGHT0.150 INCHES MAXIMUM
CRTPTOLERANCE RANGE PER SECTION-2.00 TO 2.00 PERCENT SINGLE SECTION
CWPKINSULATION RESISTANCE AT REFERENCE TEMP1000.0 MEGOHM-MICROFARADS
CWPNPOWER FACTOR AT REFERENCE TEMP IN PERCENT0.100
ADATBODY WIDTH0.300 INCHES MAXIMUM
CQJJNONDERATED OPERATING TEMP-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM
TTQYTERMINAL TYPE AND QUANTITY2 INSULATED WIRE LEAD
AARGRELIABILITY INDICATORNOT ESTABLISHED
AEBTTERMINAL DIAMETER0.019 INCHES MINIMUM AND 0.024 INCHES MAXIMUM
AGAVEND ITEM IDENTIFICATIONAN/SQQ-89(V)1 UNIT 431,PASSIVE RECEIVER
CQBQCAPACITANCE VALUE PER SECTION0.030 MICROFARADS SINGLE SECTION
CQWMNONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION100.0 DC SINGLE SECTION
CRHDTOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS-30.0 TO 30.0 SINGLE SECTION
AEBPCENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH0.169 INCHES MINIMUM AND 0.231 INCHES MAXIMUM

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8532290040 (NAICS 334416) Fixed capacitors, nesoi
SITC : 77867 Fixed capacitors, n.E.S.

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061400 - Condensers/parts noi/capacitors
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top