Buy SF4-4A1-451 Bearing Roller Rod part by Rexnord Industries Inc

Part Number:  SF4-4A1-451
Alternate P/N:  SF44A1451
Manufacturer:  rexnord industries inc
NIIN:  010292568
Item Name :  bearing roller rod
CAGE Code:  77896
INC Code:  00050
Country:  USA
NCB Code:  01

We've received your request for SF4-4A1-451 (described as Bearing Roller Rod), manufactured by Rexnord Industries Inc with CAGE code 77896. This part is registered under NSN 3110-01-029-2568, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-029-2568, NCB code 01 (origin: USA), and INC 00050. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your SF4-4A1-451 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for SF4-4A1-451

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part SF4-4A1-451, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number SF4-4A1-451 with NSN 3110-01-029-2568, 3110010292568

NSNFSCNIINCLSHazmatDEMILCancelled NSN
3110-01-029-2568

Item PartTypeName:

BEARING,ROLLER,ROD END

31100102925680N
CIICHCCESDPMICCriticalityENAC
U A0
Part NumberISCRNVCRNCCHCCMSDSSADC
39381-30695

Characteristics Data of NSN 3110-01-029-2568, 3110010292568

MRCCriteriaCharacteristic
AAJDTHREAD CLASS3B
AAJFTHREAD DIRECTIONRIGHT-HAND
AAZESHANK DIAMETER0.4370 INCHES NOMINAL
AAZFSHANK STYLEINTERNALLY THREADED W/HEXAGON END
ABHPOVERALL LENGTH1.7400 INCHES MINIMUM AND 1.7950 INCHES MAXIMUM
ABXVBORE DIAMETER0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM
ADGAOVERALL OUTSIDE DIAMETER0.7500 INCHES MINIMUM AND 0.8000 INCHES MAXIMUM
AGGYSHANK THREAD LENGTH0.7500 INCHES MINIMUM AND 0.8100 INCHES MAXIMUM
AGVTOUTER RING WIDTH0.3350 INCHES MINIMUM AND 0.3500 INCHES MAXIMUM
AGVUINNER RING WIDTH0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
AGXHLENGTH FROM BORE CENTER TO SHANK END1.3650 INCHES MINIMUM AND 1.3950 INCHES MAXIMUM
AGYKSHIELD QUANTITY2
AGZAALIGNMENT TYPESELF-ALIGNING
AHAWSELF-ALIGNMENT LOCATIONINTERNAL
ASDBWIDTH ACROSS FLATS0.4370 INCHES NOMINAL
CMLPTHREAD QUANTITY PER INCH28
CQJXNOMINAL THREAD SIZE0.250 INCHES
CTLKSELF-ALIGNMENT ANGLE10.00 DEGREES NOMINAL
LBMALUBRICATION MATERIALGREASE
LMDCLUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
MATTMATERIALSTEEL COMP 410 ROD END BODY
MATTMATERIALSTEEL COMP 440C INNER RING
MATTMATERIALSTEEL COMP 440C ROLLER
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE INNER RING
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE ROD END BODY
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE ROLLER
STYLSTYLE DESIGNATORSINGLE ROW,CONCAVE ROLLERS
THSDTHREAD SERIES DESIGNATORUNJF

Schedule B & Trade

End Use : 21180 Industrial machines, other
Schedule B : 8482500000 (NAICS 332991) Other cylindrical roller bearings
SITC : 74650 Cylindrical roller bearings, n.E.S.

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC V
Classification Control U
MGMT_CTL 9g-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: P - 77.5
LTL: P - 77.5
NMFC: 114820 - Bearings/bushings noi ball/roller
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 742 - Bearings

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top