Buy PME271M647 Capacitor Fixed Met part by Rifa Ab

Part Number:  PME271M647
Manufacturer:  rifa ab
NIIN:  010972769
Item Name :  capacitor fixed met
CAGE Code:  S8025
INC Code:  31959
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for PME271M647 (described as Capacitor Fixed Met), manufactured by Rifa Ab with CAGE code S8025. This part is registered under NSN 5910-01-097-2769, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5910 Capacitors. Our verification process will confirm traceability through supporting identifiers including NIIN 01-097-2769, NCB code 01 (origin: USA), and INC 31959. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your PME271M647 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for PME271M647

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part PME271M647, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number PME271M647 with NSN 5910-01-097-2769, 5910010972769

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5910-01-097-2769

Item PartTypeName:

CAPACITOR,FIXED,METALLIZED,PAPER

59100109727690P
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
0160-3968C1C9

Characteristics Data of NSN 5910-01-097-2769, 5910010972769

MRCCriteriaCharacteristic
AAQLBODY STYLEW/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABJTTERMINAL LENGTH1.180 INCHES MINIMUM
ADAQBODY LENGTH1.339 INCHES MAXIMUM
ADATBODY WIDTH0.984 INCHES MAXIMUM
ADAUBODY HEIGHT0.630 INCHES MAXIMUM
AEBPCENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH1.000 INCHES NOMINAL
AEBTTERMINAL DIAMETER0.039 INCHES NOMINAL
AEBZSCHEMATIC DIAGRAM DESIGNATORNO COMMON OR GROUNDED ELECTRODE(S)
CQBQCAPACITANCE VALUE PER SECTION0.470 MICROFARADS SINGLE SECTION
CQJJNONDERATED OPERATING TEMP-40.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM
CQLZTEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS500.0 SINGLE SECTION
CQWMNONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION250.0 AC-RMS SINGLE SECTION
CRTLCRITICALITY CODE JUSTIFICATIONFEAT
CRTPTOLERANCE RANGE PER SECTION-10.00 TO 10.00 PERCENT SINGLE SECTION
CWJKCASE MATERIALPLASTIC
CWPKINSULATION RESISTANCE AT REFERENCE TEMP12000.0 MEGOHMS
CWPMDISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT1.5000
FEATSPECIAL FEATURESWEAPON SYSTEM ESSENTIAL
TTQYTERMINAL TYPE AND QUANTITY2 UNINSULATED WIRE LEAD

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8532290040 (NAICS 334416) Fixed capacitors, nesoi
SITC : 77867 Fixed capacitors, n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature but does have other critical featur (s) such as tolerance, fit restrictions or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. refer to appropriate manuals or directives for specific instructions.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061400 - Condensers/parts noi/capacitors
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top