Buy 836T-T256J Switch Pressure part by Rockwell Automation Ltd

Part Number:  836T-T256J
Alternate P/N:  836TT256J
Manufacturer:  rockwell automation ltd
NIIN:  012900110
Item Name :  switch pressure
CAGE Code:  U2949
FSC:  5930 Switches
INC Code:  00206
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 836T-T256J (described as Switch Pressure), manufactured by Rockwell Automation Ltd with CAGE code U2949. This part is registered under NSN 5930-01-290-0110, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5930 Switches. Our verification process will confirm traceability through supporting identifiers including NIIN 01-290-0110, NCB code 01 (origin: USA), and INC 00206. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 836T-T256J requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 836T-T256J

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 836T-T256J, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 836T-T256J with NSN 5930-01-290-0110, 5930012900110

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5930-01-290-0110

Item PartTypeName:

SWITCH,PRESSURE

59300129001100P
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
11024289-1525

Characteristics Data of NSN 5930-01-290-0110, 5930012900110

MRCCriteriaCharacteristic
ABKWOVERALL HEIGHT7.180 INCHES MAXIMUM
ABMKOVERALL WIDTH2.580 INCHES MAXIMUM
CQGBCONTACT ACTION STIMULUSINCREASE
CQJBPROOF PRESSURE1300.00 POUNDS PER SQUARE INCH
CTHFCONTACT LOAD CURRENT RATING1.5 AMPERES INDUCTIVE LOAD THIRD VOLTAGE
CTHFCONTACT LOAD CURRENT RATING100.0 MILLIAMPERES INDUCTIVE LOAD SEVENTH VOLTAGE
CTHFCONTACT LOAD CURRENT RATING200.0 MILLIAMPERES INDUCTIVE LOAD SIXTH VOLTAGE
CTHFCONTACT LOAD CURRENT RATING400.0 MILLIAMPERES INDUCTIVE LOAD FIFTH VOLTAGE
CTYCCONTACT ADJUSTABILITYACTUATION POINT ADJUSTABLE AND DEACTUATION POINT ADJUSTABLE
CTYMCONTACT ADJUSTMENT RANGE14.70 TO 664.70 ACTUATION POINT POUNDS PER SQUARE INCH ABSOLUTE AND 14.70 TO 664.70 DEACTUATION POINT POUNDS PER SQUARE INCH ABSOLUTE
CTZBCONTACT VOLTAGE RATING IN VOLTS115.0 DC AT SEA LEVEL FIFTH VOLTAGE
CTZBCONTACT VOLTAGE RATING IN VOLTS120.0 AC AT SEA LEVEL FIRST VOLTAGE
CTZBCONTACT VOLTAGE RATING IN VOLTS230.0 DC AT SEA LEVEL SIXTH VOLTAGE
CTZBCONTACT VOLTAGE RATING IN VOLTS240.0 AC AT SEA LEVEL SECOND VOLTAGE
CTZBCONTACT VOLTAGE RATING IN VOLTS480.0 AC AT SEA LEVEL THIRD VOLTAGE
CTZBCONTACT VOLTAGE RATING IN VOLTS550.0 DC AT SEA LEVEL SEVENTH VOLTAGE
CTZBCONTACT VOLTAGE RATING IN VOLTS600.0 AC AT SEA LEVEL FOURTH VOLTAGE
CTZLPRESSURE CONNECTOR TYPEPLAIN,THREADED INTERNAL SINGLE CONNECTION
MEDAMEDIA FOR WHICH DESIGNEDLIQUID
STYLSTYLE DESIGNATORRECTANGULAR
THSDTHREAD SERIES DESIGNATORNPT SINGLE PRESSURE CONNECTION
AXGYMOUNTING METHODBASE AND UNTHREADED HOLE
CQJXNOMINAL THREAD SIZE0.250 INCHES SINGLE PRESSURE CONNECTION
CQYJMOUNTING FACILITY PATTERNTWO POSITION DIAGONAL
CRLDNONPILE-UP CONTACT ARRANGEMENT1 TWO CIRCUIT,DOUBLE BREAK/DOUBLE MAKE,BOTH POSITIONS MAINTAINED
CSCFTERMINAL TYPESCREW
CTHFCONTACT LOAD CURRENT RATING1.2 AMPERES INDUCTIVE LOAD FOURTH VOLTAGE
CTHFCONTACT LOAD CURRENT RATING6.0 AMPERES INDUCTIVE LOAD FIRST VOLTAGE
ABFEHAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTIONDUSTPROOF
ABHPOVERALL LENGTH3.500 INCHES NOMINAL
ADAUBODY HEIGHT3.500 INCHES NOMINAL
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.270 INCHES NOMINAL
AFDSLONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS2.720 INCHES NOMINAL
AFDVLONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS2.720 INCHES NOMINAL
AJZCPRESSURE SWITCH TYPEDIFFERENTIAL
CTHFCONTACT LOAD CURRENT RATING3.0 AMPERES INDUCTIVE LOAD SECOND VOLTAGE
CTYSCONTACT ADJUSTMENT TYPEEXTERNAL ACTUATION POINT SCREW AND EXTERNAL DEACTUATION POINT SCREW
AARXINSIDE DIAMETER0.250 INCHES NOMINAL SINGLE CONNECTION
CBBLFEATURES PROVIDEDELECTRICAL ACCESS PORT

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536509065 (NAICS 335931) Switches, for a voltage not exceeding 1000 volts, nesoi
SITC : 77255 Switches for electrical apparatus, n.E.S., for voltages not exceeding 1, 000 volts

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top