Buy 702-AAD93 Relay Electromagnet part by Rockwell Automation Ltd

Part Number:  702-AAD93
Alternate P/N:  702AAD93
Manufacturer:  rockwell automation ltd
NIIN:  007275840
Item Name :  relay electromagnet
CAGE Code:  01121
INC Code:  32512
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 702-AAD93 (described as Relay Electromagnet), manufactured by Rockwell Automation Ltd with CAGE code 01121. This part is registered under NSN 5945-00-727-5840, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5945 Relays and Solenoids. Our verification process will confirm traceability through supporting identifiers including NIIN 00-727-5840, NCB code 00 (origin: USA), and INC 32512. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 702-AAD93 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 702-AAD93

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 702-AAD93, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 702-AAD93 with NSN 5945-00-727-5840, 5945007275840

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5945-00-727-5840

Item PartTypeName:

RELAY,ELECTROMAGNETIC

59450072758400N
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
702-AAD93593

Characteristics Data of NSN 5945-00-727-5840, 5945007275840

MRCCriteriaCharacteristic
ABHPOVERALL LENGTH7.560 INCHES NOMINAL
ABKRCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH3.000 INCHES NOMINAL SINGLE MOUNTING FACILITY
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.219 INCHES NOMINAL SINGLE MOUNTING FACILITY
AKDXWINDING QUANTITY1
APCNCOIL QUANTITY1
ZZZVFSC APPLICATION DATARELAY,SOLENOID,EXCEPT ENGINE
ABKQCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH5.750 INCHES NOMINAL SINGLE MOUNTING FACILITY
ABKWOVERALL HEIGHT3.620 INCHES NOMINAL
ABMKOVERALL WIDTH4.620 INCHES NOMINAL
AJSSFREQUENCY IN HERTZ60.0 NOMINAL
APNPDUTY TYPECONTINUOUS
APNQARC QUENCHING METHODAIR
AXHRMOUNTING FACILITY TYPE AND QUANTITY4 UNTHREADED HOLE SINGLE MOUNTING FACILITY
CBBLFEATURES PROVIDEDPOLARIZED
CQYJMOUNTING FACILITY PATTERNRECTANGULAR SINGLE MOUNTING FACILITY
CRNGNONPILE-UP MAIN CONTACT ARRANGEMENT4 POLE,SINGLE THROW,NORMALLY OPEN,MOMENTARY ACTION
CSXFOPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP110.0 VOLTS AC 25 DEG CELSIUS SINGLE WINDING
CTDLMAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE10.0 AMPERES AC AND 10.0 AMPERES DC RESISTIVE LOAD
CWABMAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS600.0 AC AND 600.0 DC
TTQYTERMINAL TYPE AND QUANTITY10 PIN ALL FUNCTIONS

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536490075 (NAICS 335314) Relays, electromechanical, for a voltage exceeding 60 v but not exceeding 1, 000 v, nesoi
SITC : 77254 Relays for electrical apparatus used with electrical circuits not exceeding 1, 000 volts

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC V
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: P - 77.5
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top