Buy 357 8439 00 Bushing Nonmetallic part by Rockwell Collins Aerospace

Part Number: 357 8439 00

Manufacturer: rockwell collins aerospace

NSN: 5365-00-141-6943

NIIN: 001416943

Item Name : bushing nonmetallic

CAGE Code: 95105

FSC: 5365 Bushings Rings Shims and Spacers

INC Code: 39929

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for 357 8439 00 (described as Bushing Nonmetallic), manufactured by Rockwell Collins Aerospace with CAGE code 95105. This part is registered under NSN 5365-00-141-6943, classified in FSG 53 Hardware and Abrasives / FSC 5365 Bushings Rings Shims and Spacers. Our verification process will confirm traceability through supporting identifiers including NIIN 00-141-6943, NCB code 00 (origin: USA), and INC 39929. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 357 8439 00 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 357 8439 00

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 357 8439 00, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 357 8439 00 with NSN 5365-00-141-6943, 5365001416943

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5365-00-141-6943 Item PartTypeName: BUSHING,NONMETALLIC	5365	001416943	U	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
10118426	2	9	6

Characteristics Data of NSN 5365-00-141-6943, 5365001416943

MRC	Criteria	Characteristic
AASF	NONMETALLIC HARDNESS RATING	45.0 MINIMUM DUROMETER AND 55.0 MAXIMUM DUROMETER
ABHP	OVERALL LENGTH	2.125 INCHES NOMINAL
ABKK	FLANGE DIAMETER	1.314 INCHES NOMINAL
ABPM	BODY DIAMETER	0.927 INCHES NOMINAL
ADAQ	BODY LENGTH	2.062 INCHES NOMINAL
ADYT	CENTER HOLE DIAMETER	0.750 INCHES NOMINAL
AGAV	END ITEM IDENTIFICATION	MRAP-COMMON NSN-USED ON MRAP NO PERMANENT WSDC IDENTIFIED AND 153 OTHER WEAPON SYSTEMS INCLUDING Z9N-AIRCRAFT,FA-18,A-D,E/F,G (GROWLER)
AHGD	FLANGE HEIGHT	0.062 INCHES NOMINAL
APGF	DESIGN TYPE	SINGLE CENTRALLY LOCATED HOLE
BFKZ	BODY CORNER RADIUS	0.062 INCHES NOMINAL
BWSD	FLANGE END HOLE CORNER RADIUS	0.062 INCHES NOMINAL
BWSF	CORNER RADIUS BETWEEN FLANGE AND BODY	0.062 INCHES NOMINAL
MATT	MATERIAL	RUBBER CHLOROPRENE CLASS CR
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-STD-417,TYPE S,CLASS SC,GRADE SC515A1B1C1E3E5F2GM MIL STD SINGLE MATERIAL RESPONSE
STYL	STYLE DESIGNATOR	ROUND FLANGED

Schedule B & Trade

End Use : 50030	Military trucks, armored vehicles, etc.
Schedule B : 8710000090 (NAICS 336992)	Parts of armored fighting vehicles, motorized, whether or not fitted with weapons
SITC : 89111	Tanks and other armored fighting vehicles, motorized, whether or not fitted with weapons, and parts of such vehicles

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	D
Classification Control	U
MGMT_CTL	T2200x-
Quantity per pack	1
Repariability	This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life	96 mo.
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	Z - No rating
NMFC:	000000 - No nmfc freight description
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	713 - Metal hardware