Buy 640-1453 Tee Flange To Boss part by Rockwell Collins Aerospace

Part Number:  640-1453
Alternate P/N:  6401453
Manufacturer:  rockwell collins aerospace
NIIN:  012611028
Item Name :  tee flange to boss
CAGE Code:  13499
INC Code:  29671
Country:  USA
NCB Code:  01

We've received your request for 640-1453 (described as Tee Flange To Boss), manufactured by Rockwell Collins Aerospace with CAGE code 13499. This part is registered under NSN 4730-01-261-1028, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-261-1028, NCB code 01 (origin: USA), and INC 29671. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 640-1453 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 640-1453

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 640-1453, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 640-1453 with NSN 4730-01-261-1028, 4730012611028

NSNFSCNIINCLSHazmatDEMILCancelled NSN
4730-01-261-1028

Item PartTypeName:

TEE,FLANGE TO BOSS

47300126110280N
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
640-1453C9D

Characteristics Data of NSN 4730-01-261-1028, 4730012611028

MRCCriteriaCharacteristic
AAJDTHREAD CLASS3B 1ST END
AAJDTHREAD CLASS3B 2ND END
AECSBOLT HOLE QUANTITY4 3RD END
AHNCCONNECTION STYLEGASKET SEAL (BOSS) 1ST END
AHNCCONNECTION STYLEGASKET SEAL (BOSS) 2ND END
AHSJLEG LENGTH1.188 INCHES NOMINAL 1ST END
AHSJLEG LENGTH1.188 INCHES NOMINAL 2ND END
AKGFNOMINAL WIDTH2.375 INCHES 3RD END
AKGGNOMINAL LENGTH2.875 INCHES 3RD END
ARKNFLANGE SHAPERECTANGULAR WITH HOLES 3RD END
AWLSCONNECTION TYPEFLANGE 3RD END
AWLSCONNECTION TYPETHREADED INTERNAL BOSS 1ST END
AWLSCONNECTION TYPETHREADED INTERNAL BOSS 2ND END
CMLPTHREAD QUANTITY PER INCH12 1ST END
CMLPTHREAD QUANTITY PER INCH12 2ND END
CQJXNOMINAL THREAD SIZE1.312 INCHES 1ST END
CQJXNOMINAL THREAD SIZE1.312 INCHES 2ND END
CWCQBOLT HOLE NOMINAL DIAMETER0.438 INCHES 3RD END
CWCYCENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG LENGTH2.063 INCHES 3RD END
CWDCCENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.031 INCHES 3RD END
CWDFFLANGE FACE DESIGNPLAIN 3RD END
MATTMATERIALSTEEL COMP 316 OVERALL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,COND B FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SFTTSURFACE TREATMENTPASSIVATE OVERALL
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THSDTHREAD SERIES DESIGNATORUNJ 1ST END
THSDTHREAD SERIES DESIGNATORUNJ 2ND END

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top