Buy 263-1102 Connector Receptacl part by Rockwell Collins Inc

Part Number:  263-1102
Alternate P/N:  2631102
Manufacturer:  rockwell collins inc
NIIN:  016140796
Item Name :  connector receptacl
CAGE Code:  0EFD0
INC Code:  15093
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 263-1102 (described as Connector Receptacl), manufactured by Rockwell Collins Inc with CAGE code 0EFD0. This part is registered under NSN 5935-01-614-0796, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5935 Connectors Electrical. Our verification process will confirm traceability through supporting identifiers including NIIN 01-614-0796, NCB code 01 (origin: USA), and INC 15093. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 263-1102 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 263-1102

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 263-1102, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 263-1102 with NSN 5935-01-614-0796, 5935016140796

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-01-614-0796

Item PartTypeName:

CONNECTOR,RECEPTACLE,ELECTRICAL

59350161407960PA
CIICHCCESDPMICCriticalityENAC
UAG0
Part NumberISCRNVCRNCCHCCMSDSSADC
263-110259D

Characteristics Data of NSN 5935-01-614-0796, 5935016140796

MRCCriteriaCharacteristic
AAQLBODY STYLESTRAIGHT SHAPE
CXCLINCLUDED CONTACT TYPEROUND PIN 2ND MATING END ALL CONTACT GROUPINGS
ABMKOVERALL WIDTH1.790 INCHES MINIMUM AND 1.810 INCHES MAXIMUM
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM
AEHADISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH1.421 INCHES MINIMUM AND 1.431 INCHES MAXIMUM
AFQWMATING END QUANTITY3
AFQZCONTACT REMOVABILITYREMOVABLE ALL MATING ENDS ALL CONTACT GROUPINGS
AWTNOPERATING TEMP RATING-65.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM
CQTZCONTACT MATERIALCOPPER ALLOY ALL MATING ENDS ALL CONTACT GROUPINGS
CQZGINSERT MATERIALRESIN SYNTHETIC ALL MATING ENDS
CSWMSHELL SURFACE TREATMENTANODIZE
CXCGINCLUDED CONTACT QUANTITY71 1ST MATING END ALL CONTACT GROUPINGS
FEATSPECIAL FEATURESTHE CONNECTOR IS DELIVERED WITH POLARIZATION HARDWARE UNASSEMBLED.
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT PLATING GOLD
ABHPOVERALL LENGTH1.300 INCHES MINIMUM AND 1.320 INCHES MAXIMUM
ADZCENVIRONMENTAL PROTECTIONSALT WATER RESISTANT AND MOISTURE RESISTANT AND VIBRATION RESISTANT AND SHOCK RESISTANT
AFQKDISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.825 INCHES MINIMUM AND 0.835 INCHES MAXIMUM
AFQXCONTACT POSITION ARRANGEMENT STYLE13 3RD MATING END
AGAVEND ITEM IDENTIFICATIONKC-135 BLK 45
CQTMTERMINAL LOCATIONBACK ALL MATING ENDS ALL CONTACT GROUPINGS
CQYHCONTACT SURFACE TREATMENTGOLD AND NICKEL ALL MATING ENDS ALL CONTACT GROUPINGS
CSCFTERMINAL TYPECRIMP ALL MATING ENDS ALL CONTACT GROUPINGS
CSPTSHELL MATERIALALUMINUM ALLOY
ABKWOVERALL HEIGHT6.965 INCHES MINIMUM AND 6.995 INCHES MAXIMUM
AEBWCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT6.345 INCHES MINIMUM AND 6.355 INCHES MAXIMUM

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8538907080 (NAICS 335314) Parts suitable for use solely or principally with the apparatus for heading 8535, 8536, 8537, nesoi
SITC : 77282 Parts of electrical apparatus for switching or protecting electrical circuits for making connections to or in electrical circuits, n.E.S.

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD A - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC G - Item contains gold.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Sf9---n
Quantity per pack No qup
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061680 - Elec wiring plugs etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top