Buy DS125500J Resistor Thermal part by Rtie Holdings Llc

Part Number: DS125500J

Manufacturer: rtie holdings llc

NSN: 5905-00-738-1885

NIIN: 007381885

Item Name : resistor thermal

CAGE Code: 15454

FSC: 5905 Resistors

INC Code: 00309

Country: USA

NCB Code: 00

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for DS125500J (described as Resistor Thermal), manufactured by Rtie Holdings Llc with CAGE code 15454. This part is registered under NSN 5905-00-738-1885, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5905 Resistors. Our verification process will confirm traceability through supporting identifiers including NIIN 00-738-1885, NCB code 00 (origin: USA), and INC 00309. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your DS125500J requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for DS125500J

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part DS125500J, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number DS125500J with NSN 5905-00-738-1885, 5905007381885

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-00-738-1885 Item PartTypeName: RESISTOR,THERMAL	5905	007381885	0	N	B
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		B	U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
11-670-01-010	C	9	5

Characteristics Data of NSN 5905-00-738-1885, 5905007381885

MRC	Criteria	Characteristic
ADAQ	BODY LENGTH	0.420 INCHES MAXIMUM
ADAR	BODY OUTSIDE DIAMETER	0.155 INCHES MAXIMUM
AEHX	MAXIMUM POWER DISSIPATION RATING	125.00 MILLIWATTS
AEHY	AMBIENT TEMP AT FULL RATED POWER	100.0 DEG CELSIUS
AEJC	ZERO POWER TEMP COEFFICIENT OF RESISTANCE IN PERCENT PER DEG CELSIUS	0.70
AEJD	TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER	-25.0 DEG CELSIUS 4TH RESISTANCE-TEMPERATURE POINT
AEJD	TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER	-50.0 DEG CELSIUS 3RD RESISTANCE-TEMPERATURE POINT
AEJD	TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER	-65.0 DEG CELSIUS 2ND RESISTANCE-TEMPERATURE POINT
AEJD	TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER	-75.0 DEG CELSIUS 1ST RESISTANCE-TEMPERATURE POINT
AEJD	TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER	0.0 DEG CELSIUS 5TH RESISTANCE-TEMPERATURE POINT
AEJD	TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER	100.0 DEG CELSIUS 8TH RESISTANCE-TEMPERATURE POINT
AEJD	TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER	125.0 DEG CELSIUS 9TH RESISTANCE-TEMPERATURE POINT
AEJD	TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER	150.0 DEG CELSIUS 10TH RESISTANCE-TEMPERATURE POINT
AEJD	TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER	50.0 DEG CELSIUS 6TH RESISTANCE-TEMPERATURE POINT
AEJD	TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER	75.0 DEG CELSIUS 7TH RESISTANCE-TEMPERATURE POINT
AEJE	ZERO POWER RESISTANCE AT SPECIFIED TEMP	1.0 KILOHMS 9TH RESISTANCE-TEMPERATURE POINT
AEJE	ZERO POWER RESISTANCE AT SPECIFIED TEMP	225.0 OHMS 1ST RESISTANCE-TEMPERATURE POINT
AEJE	ZERO POWER RESISTANCE AT SPECIFIED TEMP	267.5 OHMS 3RD RESISTANCE-TEMPERATURE POINT
AEJE	ZERO POWER RESISTANCE AT SPECIFIED TEMP	330.0 OHMS 4TH RESISTANCE-TEMPERATURE POINT
AEJE	ZERO POWER RESISTANCE AT SPECIFIED TEMP	410.0 OHMS 5TH RESISTANCE-TEMPERATURE POINT
AEJE	ZERO POWER RESISTANCE AT SPECIFIED TEMP	600.0 OHMS 6TH RESISTANCE-TEMPERATURE POINT
AEJE	ZERO POWER RESISTANCE AT SPECIFIED TEMP	705.0 OHMS 7TH RESISTANCE-TEMPERATURE POINT
AEJE	ZERO POWER RESISTANCE AT SPECIFIED TEMP	835.0 OHMS 8TH RESISTANCE-TEMPERATURE POINT
AEJF	RESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT	-10.1 TO 10.1 10TH RESISTANCE-TEMPERATURE POINT
AEJF	RESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT	-5.3 TO 5.3 5TH RESISTANCE-TEMPERATURE POINT
AEJF	RESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT	-6.6 TO 6.6 6TH RESISTANCE-TEMPERATURE POINT
AEJF	RESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT	-6.7 TO 6.7 4TH RESISTANCE-TEMPERATURE POINT
AEJF	RESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT	-7.2 TO 7.2 7TH RESISTANCE-TEMPERATURE POINT
AEJF	RESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT	-7.4 TO 7.4 3RD RESISTANCE-TEMPERATURE POINT
AEJF	RESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT	-8.0 TO 8.0 2ND RESISTANCE-TEMPERATURE POINT
AEJF	RESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT	-8.3 TO 8.3 1ST RESISTANCE-TEMPERATURE POINT
AEJF	RESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT	-8.5 TO 8.5 8TH RESISTANCE-TEMPERATURE POINT
AEJF	RESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT	-9.2 TO 9.2 9TH RESISTANCE-TEMPERATURE POINT
CBME	CUBIC MEASURE	0.016 CUBIC INCHES
CRQJ	ZERO POWER RESISTANCE TOLERANCE IN PERCENT AT REFERENCE TEMP	-5.0 TO 5.0
SFTT	SURFACE TREATMENT	SOLDER TERMINAL
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
ABJT	TERMINAL LENGTH	1.000 INCHES MINIMUM
AEBT	TERMINAL DIAMETER	0.025 INCHES NOMINAL
AEHZ	MAXIMUM OPERATING TEMP	125.0 DEG CELSIUS
AEJA	THERMAL TIME CONSTANT IN SECONDS	35.0
AEJB	POWER DISSIPATION CONSTANT IN MILLIWATTS PER DEG CELSIUS	2.5
AEJE	ZERO POWER RESISTANCE AT SPECIFIED TEMP	1.12 KILOHMS 10TH RESISTANCE-TEMPERATURE POINT
AEJE	ZERO POWER RESISTANCE AT SPECIFIED TEMP	235.0 OHMS 2ND RESISTANCE-TEMPERATURE POINT
AKNA	INCLOSURE TYPE	ENCAPSULATED
CQWD	ZERO POWER RESISTANCE	500.000 OHMS
CTGT	REFERENCE TEMP IN DEG CELSIUS	25.0
STYL	STYLE DESIGNATOR	PLAIN ROD
TTQY	TERMINAL TYPE AND QUANTITY	2 WIRE LEAD

Schedule B & Trade

End Use : 20005	Electric apparatus
Schedule B : 8533400080 (NAICS 334416)	Variable resistors, including potentiometers, nesoi
SITC : 77235	Variable electrical resistors (including reostats and potentiometers), n.E.S.

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD	B - Represents items with esd sensitivity.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	Sf9eh-n
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	P - 77.5
NMFC:	062960 - Reostats/parts noi
SHC:	9 - Other or no special handling required (sh)
TCC:	3 - Electrostatic sensitive device (esd)
WCC:	658 - Electrical appliances, small