Buy 70307-42407-102 Lateral Drainage Pi part by S And L Aerospace Metals Llc

Part Number: 70307-42407-102

Alternate P/N: 7030742407102

Manufacturer: s and l aerospace metals llc

NSN: 4730-01-266-5628

NIIN: 012665628

Item Name : lateral drainage pi

CAGE Code: 05722

FSC: 4730 Hose Pipe Tube Lubrication and Railing Fittings

INC Code: 13180

Country: USA

NCB Code: 01

FSG: 47 Pipe Tubing Hose and Fittings

We've received your request for 70307-42407-102 (described as Lateral Drainage Pi), manufactured by S And L Aerospace Metals Llc with CAGE code 05722. This part is registered under NSN 4730-01-266-5628, classified in FSG 47 Pipe Tubing Hose and Fittings / FSC 4730 Hose Pipe Tube Lubrication and Railing Fittings. Our verification process will confirm traceability through supporting identifiers including NIIN 01-266-5628, NCB code 01 (origin: USA), and INC 13180. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 70307-42407-102 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 70307-42407-102

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Verify you’re human

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 70307-42407-102, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 70307-42407-102 with NSN 4730-01-266-5628, 4730012665628

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
4730-01-266-5628 Item PartTypeName: LATERAL,DRAINAGE PIPE	4730	012665628	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
70307-42407	C	9	D

Characteristics Data of NSN 4730-01-266-5628, 4730012665628

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3B 1ST END
AAJD	THREAD CLASS	3B 2ND END
AAJD	THREAD CLASS	3B 3RD END
AAJD	THREAD CLASS	3B 4TH END
AAJD	THREAD CLASS	3B INLET
ACSF	SWEEP TYPE	LONG
AHNC	CONNECTION STYLE	GASKET SEAL (BOSS) 1ST END
AHNC	CONNECTION STYLE	GASKET SEAL (BOSS) 2ND END
AHNC	CONNECTION STYLE	GASKET SEAL (BOSS) 3RD END
AHNC	CONNECTION STYLE	GASKET SEAL (BOSS) INLET
AHSJ	LEG LENGTH	1.810 INCHES NOMINAL INLET
AHSJ	LEG LENGTH	1.820 INCHES NOMINAL 1ST END
AHSJ	LEG LENGTH	2.870 INCHES NOMINAL 2ND END
AWLS	CONNECTION TYPE	THREADED INTERNAL BOSS 1ST END
AWLS	CONNECTION TYPE	THREADED INTERNAL BOSS 2ND END
AWLS	CONNECTION TYPE	THREADED INTERNAL BOSS 3RD END
AWLS	CONNECTION TYPE	THREADED INTERNAL BOSS INLET
CMLP	THREAD QUANTITY PER INCH	12 1ST END
CQGJ	INLET LOCATION	LOW HEEL SINGLE INLET
CQJX	NOMINAL THREAD SIZE	0.875 INCHES 2ND END
CQJX	NOMINAL THREAD SIZE	0.875 INCHES 3RD END
CQJX	NOMINAL THREAD SIZE	0.875 INCHES 4TH END
CQJX	NOMINAL THREAD SIZE	0.875 INCHES INLET
CQJX	NOMINAL THREAD SIZE	1.312 INCHES 1ST END
MATT	MATERIAL	ALUMINUM ALLOY 6061 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/8,T651 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THSD	THREAD SERIES DESIGNATOR	UNJ 1ST END
THSD	THREAD SERIES DESIGNATOR	UNJF 2ND END
THSD	THREAD SERIES DESIGNATOR	UNJF 3RD END
THSD	THREAD SERIES DESIGNATOR	UNJF 4TH END
THSD	THREAD SERIES DESIGNATOR	UNJF INLET