Buy CR2172-5-4 Rivet Blind part by Satair Usa Inc

Part Number: CR2172-5-4

Alternate P/N: CR217254

Manufacturer: satair usa inc

NSN: 5320-00-007-6381

NIIN: 000076381

Item Name : rivet blind

CAGE Code: R1120

FSC: 5320 Rivets

INC Code: 00864

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for CR2172-5-4 (described as Rivet Blind), manufactured by Satair Usa Inc with CAGE code R1120. This part is registered under NSN 5320-00-007-6381, classified in FSG 53 Hardware and Abrasives / FSC 5320 Rivets. Our verification process will confirm traceability through supporting identifiers including NIIN 00-007-6381, NCB code 00 (origin: USA), and INC 00864. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your CR2172-5-4 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for CR2172-5-4

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part CR2172-5-4, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number CR2172-5-4 with NSN 5320-00-007-6381, 5320000076381

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5320-00-007-6381 Item PartTypeName: RIVET,BLIND	5320	000076381	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
10123398	5	9	6

Characteristics Data of NSN 5320-00-007-6381, 5320000076381

MRC	Criteria	Characteristic
AASB	FASTENER LENGTH	0.388 INCHES NOMINAL
AASK	HEAD STYLE	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE-LESS THAN 135 DEG W OR W/O CHAMFER)
AAZE	SHANK DIAMETER	0.155 INCHES MINIMUM AND 0.159 INCHES MAXIMUM
AAZF	SHANK STYLE	SELF-PLUGGING MECHANICALLY LOCKED STEM
AAZG	HEAD MAJOR DIAMETER	0.282 INCHES MINIMUM AND 0.290 INCHES MAXIMUM
ABAF	EXPANSION DEVICE	SERRATED STEM-TYPE W
ANEE	GRIP LENGTH	0.188 INCHES MINIMUM AND 0.258 INCHES MAXIMUM
CQSX	SHEAR STRENGTH	710 SINGLE POUNDS PER SQUARE INCH
CRSQ	COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
HEAT	HEAT TREATMENT	H-38 STRAIN HARDENED LOCKING RING
MATT	MATERIAL	ALUMINUM ALLOY 5056 LOCKING RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE LOCKING RING
SFTT	SURFACE TREATMENT	ANODIZE OR CHROMATE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	T2200x-
Quantity per pack	100
Repariability	Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. refer to appropriate manuals or directives for specific instructions.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	Q - 70.0
NMFC:	013630 - Alum rivets
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	713 - Metal hardware