Buy GC30 64P1 Gear Spur part by Secs Inc

Part Number: GC30 64P1

Manufacturer: secs inc

NSN: 3020-00-264-8559

NIIN: 002648559

Item Name : gear spur

CAGE Code: 23266

FSC: 3020 Gears Pulleys Sprockets and Transmission Chain

INC Code: 05466

Country: USA

NCB Code: 00

FSG: 30 Mechanical Power Transmission Equipment

We've received your request for GC30 64P1 (described as Gear Spur), manufactured by Secs Inc with CAGE code 23266. This part is registered under NSN 3020-00-264-8559, classified in FSG 30 Mechanical Power Transmission Equipment / FSC 3020 Gears Pulleys Sprockets and Transmission Chain. Our verification process will confirm traceability through supporting identifiers including NIIN 00-264-8559, NCB code 00 (origin: USA), and INC 05466. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your GC30 64P1 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for GC30 64P1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part GC30 64P1, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number GC30 64P1 with NSN 3020-00-264-8559, 3020002648559

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3020-00-264-8559 Item PartTypeName: GEAR,SPUR	3020	002648559	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
GC30-64P1	2	1	3

Characteristics Data of NSN 3020-00-264-8559, 3020002648559

MRC	Criteria	Characteristic
AAQL	BODY STYLE	PLAIN,SOLID
ABSX	ATTACHMENT METHOD	CLAMP
AGJS	PITCH DIAMETER	0.6657 INCHES MINIMUM AND 0.6667 INCHES MAXIMUM
AJLA	TEETH QUANTITY	64
ANTP	BORE STYLE	PLAIN BOTH ENDS
CWCD	NOMINAL OUTSIDE DIAMETER	0.687 INCHES
CWNH	TOOTH FORM	STANDARD
CWPP	PRESSURE ANGLE	20.0000 DEGREES
CWQL	NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END	0.281 INCHES FIRST END
CWRM	FACE NOMINAL WIDTH	0.125 INCHES
CWRS	BORE NOMINAL DIAMETER	0.125 INCHES BOTH ENDS
CWTR	HUB STYLE DESIGNATOR	SPLIT FIRST END
CWTX	HUB NOMINAL DIAMETER	0.188 INCHES FIRST END
CWWC	CLAMPING SURFACE NOMINAL LENGTH	0.250 INCHES FIRST END
CWWH	END NOMINAL LENGTH	0.250 INCHES FIRST END
CWWK	PRECISION CLASSIFICATION	QUALITY NUMBER 10
FEAT	SPECIAL FEATURES	HUB IS ALSO STEPOPED,0.250 IN DIA,0.031 IN.LG
MATT	MATERIAL	STEEL COMP 303 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-764,TYPE 303,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35,TYPE 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
STYL	STYLE DESIGNATOR	PROTRUDING HUB
ZZZY	REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS	AS DIFFERENTIATED BY SPECIAL FEATURES

Schedule B & Trade

End Use : 21180	Industrial machines, other
Schedule B : 8483409000 (NAICS 333612)	Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements entered separately
SITC : 74840	Gears and gearing; ball screws; gear boxes and other speed changers (including torque converters)

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	J
Classification Control	U
MGMT_CTL	9b-----
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	197337 - Wheels cog/gear/pinion/sprock
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	593 - Motors and parts, (machinery and parts),(less than 35 feet)