Buy SES641 Semiconductor Device Thyristor part by Semitronics Corp

Part Number:  SES641
Manufacturer:  semitronics corp
NIIN:  012035814
CAGE Code:  31338
INC Code:  33096
Country:  USA
NCB Code:  01

We've received your request for SES641 (described as Semiconductor Device Thyristor), manufactured by Semitronics Corp with CAGE code 31338. This part is registered under NSN 5961-01-203-5814, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-203-5814, NCB code 01 (origin: USA), and INC 33096. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your SES641 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for SES641

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part SES641, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number SES641 with NSN 5961-01-203-5814, 5961012035814

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5961-01-203-5814

Item Description:

Semiconductor Device Thyristor

59610120358140NA
CIICHCCESDPMICCriticalityENAC
UAA
Part NumberISCRNVCRNCCHCCMSDSSADC
Ses641595

Characteristics Data of NSN 5961-01-203-5814, 5961012035814

MRCCriteriaCharacteristic
ABBHINCLOSURE MATERIALMETAL
CTSGMAXIMUM OPERATING TEMP PER MEASUREMENT POINT125.0 DEG CELSIUS JUNCTION
CCDGOVERALL WIDTH ACROSS FLATS0.562 INCHES MAXIMUM
THSDTHREAD SERIES DESIGNATORUNF
CTMZSEMICONDUCTOR MATERIALSILICON
CTQNVOLTAGE RATING IN VOLTS PER CHARACTERISTIC1440.0 MAXIMUM NONREPETITIVE PEAK REVERSE VOLTAGE AND 1200.0 MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE AND 1200.0 MAXIMUM REPETITIVE PEAK OFF-STATE VOLTAGE
AXGYMOUNTING METHODTHREADED STUD
AGAVEND ITEM IDENTIFICATIONSUPPLY CLASS AOE; EMORY S. LAND CLASS AS; TARAWA CLASS LHA; WASP CLASS LHD; ARLEIGH BURKE CLASS DDG; KIDD CLASS DDG; NIMITZ CLASS CVN; FORRESTAL CLASS CV; SPRUANCE CLASS DD (963); LANDING SYSTEM AUTOMATIC CARRIER, DUAL CHANNEL
TTQYTERMINAL TYPE AND QUANTITY2 TAB, SOLDER LUG AND 1 THREADED STUD
FEATSPECIAL FEATURESWEAPON SYSTEM ESSENTIAL
CQJXNOMINAL THREAD SIZE0.250 INCHES
CRTLCRITICALITY CODE JUSTIFICATIONFEAT
ABHPOVERALL LENGTH1.646 INCHES MAXIMUM
CTQXCURRENT RATING PER CHARACTERISTIC35.00 AMPERES MAXIMUM ON-STATE CURRENT, RMS TOTAL
CTRDPOWER RATING PER CHARACTERISTIC1.0 WATTS MAXIMUM AVERAGE GATE POWER DISSIPATION AND 60.0 WATTS MAXIMUM PEAK GATE POWER DISSIPATION
AKPVMOUNTING FACILITY QUANTITY1

Schedule B & Trade

End Use : 21320 Semiconductors
Schedule B : 8541300080 (NAICS 334413) Thyristors, diacs & triacs, other than photosensitive devices, nesoi
SITC : 77635 Thyristors, diacs and triacs (excluding photosensitive devices)

Identification

CRITL The item does not have a nuclear hardened feature but does have other critical featur (s) such as tolerance, fit restrictions or application.
ESD A - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Y
Classification Control U
MGMT_CTL 9b-----
Quantity per pack No qup
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 063025 - Semiconductors/devices noi etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Complete Aerospace and NSN Parts Purchasing Platform

asach

AS9120B and ISO 9001:2015

asap_member

Aviation Suppliers Association Member

certified_company

FAA AC 0056B Accredited

as6081_supplier

AS 6081:2012 Certification

esd_association

ESD S20.20-2014 Certification

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top