Buy 9603 Resistor Variable W part by Sensor Systems Inc

Part Number: 9603

Manufacturer: sensor systems inc

NSN: 5905-00-920-8973

NIIN: 009208973

Item Name : resistor variable w

CAGE Code: 04454

FSC: 5905 Resistors

INC Code: 37406

Country: USA

NCB Code: 00

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for 9603 (described as Resistor Variable W), manufactured by Sensor Systems Inc with CAGE code 04454. This part is registered under NSN 5905-00-920-8973, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5905 Resistors. Our verification process will confirm traceability through supporting identifiers including NIIN 00-920-8973, NCB code 00 (origin: USA), and INC 37406. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 9603 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 9603

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 9603, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 9603 with NSN 5905-00-920-8973, 5905009208973

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-00-920-8973 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON	5905	009208973	0	N	B
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		B	U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
41409A	6	2	3

Characteristics Data of NSN 5905-00-920-8973, 5905009208973

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	2
AAQL	BODY STYLE	CYLINDRICAL SERVO MOUNTED
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
AAVL	PILOT DIAMETER	1.87495 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM
AAVM	PILOT LENGTH	0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
ABHP	OVERALL LENGTH	2.932 INCHES MAXIMUM
ABPA	UNDERCUT DIAMETER	1.87495 INCHES MINIMUM AND 1.875 INCHES MAXIMUM
ABPC	UNDERCUT WIDTH	0.0730 INCHES MINIMUM
ABPM	BODY DIAMETER	2.025 INCHES MAXIMUM
ABWV	SHAFT DIAMETER	0.250 INCHES NOMINAL
ABXF	SHAFT LENGTH	0.750 INCHES NOMINAL
ADAQ	BODY LENGTH	2.150 INCHES MAXIMUM
ADAV	OVERALL DIAMETER	2.200 INCHES MAXIMUM
AECZ	MOUNTING LIP DIAMETER	1.9900 INCHES MINIMUM AND 2.0050 INCHES MAXIMUM
AEDA	MOUNTING LIP DEPTH	0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM
AEDX	SHAFT STYLE	ROUND
AEDZ	SHAFT BEARING TYPE	BALL
AEEZ	CONTACT ARM ELECTRICAL OFF POSITION	FULLY CW
AEFD	ACTUATOR TYPE	SINGLE SHAFT
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	320.0 NOMINAL
AEFK	MAXIMUM STARTING TORQUE	60.00 INCH-OUNCES
AEFL	MAXIMUM RUNNING TORQUE	60.00 INCH-OUNCES
AEFM	MAXIMUM STOP TORQUE	200.00 INCH-OUNCES
AEFY	SHAFT END PLAY	0.001 INCHES
AEFZ	SHAFT RUNOUT	0.001 INCHES
AEGA	LATERAL RUNOUT	0.002 INCHES
AEGB	PILOT DIAMETER RUNOUT	0.001 INCHES
AEGC	SHAFT RADIAL PLAY	0.002 INCHES
APXH	TERMINAL LOCATION	LEFT ADJACENT SIDE TWO ROWS
AXGY	MOUNTING METHOD	CLAMP RING
CQCC	ELECTRICAL RESISTANCE PER SECTION	10.0 KILOHMS 2ND SECTION
CQCC	ELECTRICAL RESISTANCE PER SECTION	50.0 KILOHMS 1ST SECTION
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	320.0 NOMINAL
CRFJ	TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-500.0 TO 500.0 ALL SECTIONS
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	0.8 FREE AIR 2ND SECTION
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	1.26 FREE AIR 1ST SECTION
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 2ND SECTION
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-20.0 TO 20.0 1ST SECTION
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	CLUTCH
TEST	TEST DATA DOCUMENT	89954-539D818 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW
TTQY	TERMINAL TYPE AND QUANTITY	6 WIRE LEAD

Schedule B & Trade

End Use : 20005	Electric apparatus
Schedule B : 8533390080 (NAICS 334416)	Wirewound variable resistors, nesoi
SITC : 77233	Wirewound electrical variable resistors (including rheostats and potentiometers)

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD	B - Represents items with esd sensitivity.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	J
Classification Control	U
MGMT_CTL	Sf9eh-n
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	P - 77.5
NMFC:	062960 - Reostats/parts noi
SHC:	9 - Other or no special handling required (sh)
TCC:	3 - Electrostatic sensitive device (esd)
WCC:	658 - Electrical appliances, small