Buy 5964 Resistor Variable W part by Sensor Systems Inc

Part Number:  5964
Manufacturer:  sensor systems inc
NIIN:  012671321
Item Name :  resistor variable w
CAGE Code:  04454
INC Code:  37408
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 5964 (described as Resistor Variable W), manufactured by Sensor Systems Inc with CAGE code 04454. This part is registered under NSN 5905-01-267-1321, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5905 Resistors. Our verification process will confirm traceability through supporting identifiers including NIIN 01-267-1321, NCB code 01 (origin: USA), and INC 37408. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 5964 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 5964

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 5964, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 5964 with NSN 5905-01-267-1321, 5905012671321

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-01-267-1321

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,PRE

59050126713210NB
CIICHCCESDPMICCriticalityENAC
UBA
Part NumberISCRNVCRNCCHCCMSDSSADC
09BW2434525

Characteristics Data of NSN 5905-01-267-1321, 5905012671321

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY2
AAQLBODY STYLECYLINDRICAL BUSHING MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABPMBODY DIAMETER0.875 INCHES NOMINAL
ABWVSHAFT DIAMETER0.250 INCHES NOMINAL
ABXFSHAFT LENGTH1.218 INCHES NOMINAL
ADAPMOUNTING BUSHING LENGTH0.312 INCHES NOMINAL
ADAQBODY LENGTH2.500 INCHES MAXIMUM
AEDQUNDERCUT DIAMETER0.125 INCHES NOMINAL
AEDXSHAFT STYLEROUND,STEPPED
AEDZSHAFT BEARING TYPEBEARING
AEEASWITCH TYPEROTARY
AEEDSWITCH VOLTAGE RATING IN VOLTS28.0
AEEZCONTACT ARM ELECTRICAL OFF POSITIONFULLY CCW
AEFDACTUATOR TYPEDUAL CONCENTRIC
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION270.0 NOMINAL
AEFKMAXIMUM STARTING TORQUE9.00 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE9.00 INCH-OUNCES
AEFMMAXIMUM STOP TORQUE64.00 INCH-OUNCES
AEFNNONTURN DEVICE LOCATIONAT 6 OCLOCK
AEFPNONTURN DEVICE RADIUS0.312 INCHES NOMINAL
AEGDMECHANICAL BACKLASH IN DEG ANGULAR ROTATION3.0
AEGHSWITCH OPERATING POSITIONSTART OF ROTATION
AEGJSWITCH CONTACT ARRANGEMENTSINGLE POLE,SINGLE THROW,NORMALLY OPEN,BOTH POSITIONS MAINTAINED
AFJNFRAGILITY FACTORMODERATELY RUGGED
AGAVEND ITEM IDENTIFICATIONB-1B AIRCRAFT
AGQLUNDERCUT LENGTH0.406 INCHES NOMINAL
AJYNSCREW THREAD DIAMETER0.375 INCHES NOMINAL
AJYPSCREW THREAD SERIES DESIGNATORUNEF
AJYQSCREW THREAD QUANTITY PER INCH32.0
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
AXGYMOUNTING METHODSTANDARD BUSHING
CBBLFEATURES PROVIDEDSWITCH
CQCCELECTRICAL RESISTANCE PER SECTION10.0 KILOHMS ALL SECTIONS
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG275.0 NOMINAL
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-0.25 TO 0.25 ALL SECTIONS
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 ALL SECTIONS
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-30.0 TO 30.0 ALL SECTIONS
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR 1ST SECTION AND 1.5 FREE AIR 2ND SECTION
CRGMFUNCTION CONFORMITY PER SECTIONALL SECTIONS INDEPENDENT LINEARITY
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-3.0 TO 3.0 ALL SECTIONS
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
CSBXFUNCTION CHARACTERISTIC PER SECTIONALL SECTIONS LINEAR
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER85.0 ALL SECTIONS
CSDKSWITCH CURRENT TYPE AND RATING IN AMPS0.150 DC
TESTTEST DATA DOCUMENT43999-LE444-0001 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING D
TTQYTERMINAL TYPE AND QUANTITY9 WIRE LEAD

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533400080 (NAICS 334416) Variable resistors, including potentiometers, nesoi
SITC : 77235 Variable electrical resistors (including reostats and potentiometers), n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Sf9uc-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: Z - Other or no special handling required (sh)
TCC: 3 - Electrostatic sensitive device (esd)
WCC: 657 - Instruments, electric meter

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top