Buy 2E06A11 1X1045 Switch Rotary part by Shallcross Inc

Part Number:  2E06A11 1X1045
Manufacturer:  shallcross inc
NIIN:  009365940
Item Name :  switch rotary
CAGE Code:  54294
FSC:  5930 Switches
INC Code:  02134
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 2E06A11 1X1045 (described as Switch Rotary), manufactured by Shallcross Inc with CAGE code 54294. This part is registered under NSN 5930-00-936-5940, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5930 Switches. Our verification process will confirm traceability through supporting identifiers including NIIN 00-936-5940, NCB code 00 (origin: USA), and INC 02134. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 2E06A11 1X1045 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 2E06A11 1X1045

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 2E06A11 1X1045, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 2E06A11 1X1045 with NSN 5930-00-936-5940, 5930009365940

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5930-00-936-5940

Item PartTypeName:

SWITCH,ROTARY

59300093659400P
CIICHCCESDPMICCriticalityENAC
U A0
Part NumberISCRNVCRNCCHCCMSDSSADC
2E06A11-1X1045223

Characteristics Data of NSN 5930-00-936-5940, 5930009365940

MRCCriteriaCharacteristic
CSLCSWITCH ACTUATOR POSITIONING INCREMENT15.0 DEGREES SINGLE ACTUATOR
CTDNSWITCH ACTUATOR STOP DEVICE TYPEFIXED STOP SINGLE ACTUATOR
CTHFCONTACT LOAD CURRENT RATING300.0 MILLIAMPERES RESISTIVE LOAD AND 50.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL
CTHFCONTACT LOAD CURRENT RATING50.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL
FEATSPECIAL FEATURESNO DETENT MECHANISM-MTG HARDWARE NOT SUPPLIED-SHAFT EXTENDS FROM REAR 1.160 IN,IS PARALLEL FLATTED W/ 3RD FLAT 0.250 IN FROM END
STYLSTYLE DESIGNATORSQUARE WAFER,PANEL MOUNT
THSDTHREAD SERIES DESIGNATORUNC 2ND MOUNTING FACILITY
THSDTHREAD SERIES DESIGNATORUNEF 1ST MOUNTING FACILITY
AASATHREAD LENGTH0.062 INCHES NOMINAL 2ND MOUNTING FACILITY
AASATHREAD LENGTH0.312 INCHES NOMINAL 1ST MOUNTING FACILITY
ABHPOVERALL LENGTH3.067 INCHES MINIMUM AND 3.129 INCHES MAXIMUM
ABKWOVERALL HEIGHT1.719 INCHES MINIMUM AND 1.781 INCHES MAXIMUM
ABMKOVERALL WIDTH1.719 INCHES MINIMUM AND 1.781 INCHES MAXIMUM
ABNBFIRST FLAT LENGTH0.250 INCHES NOMINAL SINGLE ACTUATOR
ABNCFLAT HEIGHT0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM SINGLE ACTUATOR
ABWVSHAFT DIAMETER0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR
ABXFSHAFT LENGTH0.688 INCHES NOMINAL SINGLE ACTUATOR
AEFPNONTURN DEVICE RADIUS0.531 INCHES NOMINAL AT 12:00 OCLOCK
AFBHINDIVIDUAL SECTION QUANTITY1
AFDCNONTURN DEVICE TYPETAB AT 12:00 OCLOCK
AFDSLONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM SINGLE MOUNTING FACILITY
AJZESWITCH CONTACT BASIC DESIGNNONPILE-UP SYMMETRICAL
AKPXPOLE QUANTITY2 SINGLE SECTION FRONT
AKPYTHROW QUANTITY10 SINGLE SECTION FRONT
AXGYMOUNTING METHODTHREADED BUSHING 1ST MOUNTING FACILITY
AXGYMOUNTING METHODTHREADED HOLE 2ND MOUNTING FACILITY
CMLPTHREAD QUANTITY PER INCH32 1ST MOUNTING FACILITY
CMLPTHREAD QUANTITY PER INCH32 2ND MOUNTING FACILITY
CQJXNOMINAL THREAD SIZE0.138 INCHES 2ND MOUNTING FACILITY
CQJXNOMINAL THREAD SIZE0.375 INCHES 1ST MOUNTING FACILITY
CQMKCONTACT VOLTAGE RATING IN VOLTS30.0 DC AT SEA LEVEL
CQMKCONTACT VOLTAGE RATING IN VOLTS300.0 AC AT SEA LEVEL
CQRQSHAFT FLAT/SLOT ANGULAR LOCATION150.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR
CQYJMOUNTING FACILITY PATTERNTWO POSITION IN-LINE 2ND MOUNTING FACILITY
CRJHSWITCH ACTUATOR INDEXING POSITION QUANTITY11 SINGLE ACTUATOR
CRSJSHAFT TYPEROUND,FLATTED SINGLE ACTUATOR
CSCFTERMINAL TYPETAB,SOLDER LUG
CSHWCONTACT SWITCHING ACTIONMAKES BEFORE BREAKS SINGLE SECTION FRONT

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536509020 (NAICS 335931) Switches, rotary, rated at not over 5 a, for a voltage not exceeding 1, 000 v
SITC : 77255 Switches for electrical apparatus, n.E.S., for voltages not exceeding 1, 000 volts

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Y
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top