Buy 361136 Multimeter part by Sierra Technologies Inc

Part Number:  361136
Manufacturer:  sierra technologies inc
NIIN:  010220737
Item Name :  multimeter
CAGE Code:  25778
INC Code:  00794
Country:  USA
NCB Code:  01
FSG:  66 Instruments And Laboratory Equipment

We've received your request for 361136 (described as Multimeter), manufactured by Sierra Technologies Inc with CAGE code 25778. This part is registered under NSN 6625-01-022-0737, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6625 Electrical and Electronic Properties Measuring and Testing Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 01-022-0737, NCB code 01 (origin: USA), and INC 00794. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 361136 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 361136

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 361136, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-01-022-0737, 6625010220737

MRCCriteriaCharacteristic
SPCLSPECIAL TEST FEATURESCONFORMS TO MIL-M-10304
BHDCSCALE GRADUATION TYPENONLINEAR SINGLE INDICATOR 1ST RANGE LINEAR SINGLE INDICATOR 2ND RANGE
MARKSPECIAL MARKINGSSET LEVEL W/ARROW AT 0.5 ON V SCALE; DBM 50 OHMS OUTPUT LEVEL
APMMDIAL SCALE MARKING COLORBLACK SINGLE INDICATOR ALL RANGES
AWZJPOWER SOURCEEXTERNAL
AXHRMOUNTING FACILITY TYPE AND QUANTITY3 UNTHREADED HOLE
APSTMETER DEPTH BEHIND MOUNTING FLANGE1.200 INCHES MAXIMUM
CTQLMOVEMENT SUSPENSION METHODJEWEL PIVOT BASE
NHCFNUCLEAR HARDNESS CRITICAL FEATURENONHARDENED
AQECMOVEMENT TYPEMOVING COIL, PERMANENT MAGNET
CTTDCIRCUIT ATTACHMENT METHOD AND QUANTITY2 THREADED STUD
ZZZVIII FSC APPLICATION DATATEST SET,ELECT. EQUIP.
AMQYINSTALLATION DESIGNPANEL
SFTTSURFACE TREATMENTENAMEL
ASSSPOINTER COLORBLACK SINGLE INDICATOR ALL RANGES
AQFYBACKGROUND COLORWHITE SINGLE INDICATOR ALL RANGES
ABWGSCALE DIVISION QUANTITY10 SINGLE INDICATOR 2ND RANGE
ABTBMOUNTING HOLE DIAMETER0.150 INCHES NOMINAL
BLSBSCALE SELECTION METHODTERMINAL
BHMWMEASUREMENT RANGE0.0 TO 10.0 DECIBELS ABOVE OR BELOW ONE MILLIWATT SINGLE INDICATOR 1ST RANGE 0.0 TO 1.0 VOLTS SINGLE INDICATOR 2ND RANGE
FEATSPECIAL FEATURESRUGGEDIZED
ABHPOVERALL LENGTH2.000 INCHES MAXIMUM
AMKDINDICATOR TYPEDIAL W/POINTER
ADAVOVERALL DIAMETER3.500 INCHES NOMINAL
AKYNFURNISHED ITEMS AND QUANTITYTERM. HDW 2
APSWMETER BODY DIAMETER BEHIND MOUNTING FLANGE2.670 INCHES NOMINAL
APSN(NON-CORE DATA) PANEL FOR WHICH DESIGNEDMAGNETIC OR NONMAGNETIC
ANRLMOUNTING ARRANGEMENT STYLETHREE HOLE/STUD BOLT CIRCLE
AACTCIRCUIT CURRENT FOR WHICH DESIGNEDDC
BHSX(NON-CORE DATA) CIRCUIT CONSTRUCTION TYPENONELECTRONIC
CBBLFEATURES PROVIDEDZERO ADJUSTER
AAPBDIELECTRIC WITHSTANDING VOLTAGE IN VOLTS3000.0
MATTMATERIALSTEEL
APPNACCURACY IN PERCENT-2.0 TO 2.0 AT FULL SCALE SINGLE INDICATOR ALL RANGES
AFFLMOUNTING BOLT CIRCLE DIAMETER3.160 INCHES NOMINAL
STYLSTYLE DESIGNATORC1 ROUND FLUSH MTG
ADZCENVIRONMENTAL PROTECTIONSHOCK RESISTANT AND VIBRATION RESISTANT

Schedule B & Trade

End Use : 21160 Measuring, testing, control instruments
Schedule B : 9030908030 (NAICS 334515) Parts and accessories of articles of schedule b subheading 9030.39
SITC : 87479 Parts and accessories for instruments and apparatus (except meters) measuring etc. Electrical quanities and devices measuring etc. Ionized radiations

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Q22tdx-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 136740 - Meters elec/parts
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 657 - Instruments, electric meter

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top