Buy FBM-320 Gage Thickness part by Snap On Holdings Gmbh

Part Number: FBM-320

Alternate P/N: FBM320

Manufacturer: snap on holdings gmbh

NSN: 5210-01-045-3526

NIIN: 010453526

Item Name : gage thickness

CAGE Code: C7127

FSC: 5210 measuring Tools Craftsmens

INC Code: 05977

Country: USA

NCB Code: 01

FSG: 52 Measuring Tools

We've received your request for FBM-320 (described as Gage Thickness), manufactured by Snap On Holdings Gmbh with CAGE code C7127. This part is registered under NSN 5210-01-045-3526, classified in FSG 52 Measuring Tools / FSC 5210 measuring Tools Craftsmens. Our verification process will confirm traceability through supporting identifiers including NIIN 01-045-3526, NCB code 01 (origin: USA), and INC 05977. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your FBM-320 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for FBM-320

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part FBM-320, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number FBM-320 with NSN 5210-01-045-3526, 5210010453526

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5210-01-045-3526 Item PartTypeName: GAGE,THICKNESS	5210	010453526	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
04052333005845	2	2	5

Characteristics Data of NSN 5210-01-045-3526, 5210010453526

MRC	Criteria	Characteristic
AEAE	BLADE LENGTH	3.000 INCHES NOMINAL
AJLB	BLADE QUANTITY	20
BDLS	MEASUREMENT SYSTEM	METRIC
CMZF	BLADE TIP WIDTH	0.500 INCHES NOMINAL
CNLG	BLADE GROUP QUANTITY	1
CNLH	BLADE LOCK	INCLUDED
CPMW	BLADE THICKNESS	0.05 MILLIMETERS 1ST BLADE
CPMW	BLADE THICKNESS	0.10 MILLIMETERS 2ND BLADE
CPMW	BLADE THICKNESS	0.15 MILLIMETERS 3RD BLADE
CPMW	BLADE THICKNESS	0.20 MILLIMETERS 4TH BLADE
CPMW	BLADE THICKNESS	0.25 MILLIMETERS 5TH BLADE
CPMW	BLADE THICKNESS	0.30 MILLIMETERS 6TH BLADE
CPMW	BLADE THICKNESS	0.35 MILLIMETERS 7TH BLADE
CPMW	BLADE THICKNESS	0.40 MILLIMETERS 8TH BLADE
CPMW	BLADE THICKNESS	0.45 MILLIMETERS 9TH BLADE
CPMW	BLADE THICKNESS	0.50 MILLIMETERS 10TH BLADE
CPMW	BLADE THICKNESS	0.55 MILLIMETERS 11TH BLADE
CPMW	BLADE THICKNESS	0.60 MILLIMETERS 12TH BLADE
CPMW	BLADE THICKNESS	0.65 MILLIMETERS 13TH BLADE
CPMW	BLADE THICKNESS	0.70 MILLIMETERS 14TH BLADE
CPMW	BLADE THICKNESS	0.75 MILLIMETERS 15TH BLADE
CPMW	BLADE THICKNESS	0.80 MILLIMETERS 16TH BLADE
CPMW	BLADE THICKNESS	0.85 MILLIMETERS 17TH BLADE
CPMW	BLADE THICKNESS	0.90 MILLIMETERS 18TH BLADE
CPMW	BLADE THICKNESS	0.95 MILLIMETERS 19TH BLADE
CPMW	BLADE THICKNESS	1.00 MILLIMETERS 20TH BLADE
CYMR	BLADE SHAPE	STRAIGHT