Buy MS90362-3 Connector Receptacl part by Society Of Automotive Engineers Inc

Part Number: MS90362-3

Alternate P/N: MS903623

Manufacturer: society of automotive engineers inc

NSN: 5935-01-030-1838

NIIN: 010301838

Item Name : connector receptacl

CAGE Code: 81343

FSC: 5935 Connectors Electrical

INC Code: 15093

Country: USA

NCB Code: 01

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for MS90362-3 (described as Connector Receptacl), manufactured by Society Of Automotive Engineers Inc with CAGE code 81343. This part is registered under NSN 5935-01-030-1838, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5935 Connectors Electrical. Our verification process will confirm traceability through supporting identifiers including NIIN 01-030-1838, NCB code 01 (origin: USA), and INC 15093. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MS90362-3 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MS90362-3

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part MS90362-3, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number MS90362-3 with NSN 5935-01-030-1838, 5935010301838

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5935-01-030-1838 Item PartTypeName: CONNECTOR,RECEPTACLE,ELECTRICAL	5935	010301838	0	P	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		A	S	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
5935PL1608949	2	9	6

Characteristics Data of NSN 5935-01-030-1838, 5935010301838

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	2A
AAJF	THREAD DIRECTION	RIGHT-HAND
AAQL	BODY STYLE	STRAIGHT SHAPE,POWER TYPE
ABHP	OVERALL LENGTH	3.469 INCHES MINIMUM AND 3.531 INCHES MAXIMUM
ABKQ	CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH	2.745 INCHES MINIMUM AND 2.755 INCHES MAXIMUM
ABKW	OVERALL HEIGHT	2.688 INCHES NOMINAL
ABMK	OVERALL WIDTH	4.190 INCHES MINIMUM AND 4.252 INCHES MAXIMUM
AEHA	DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	3.745 INCHES MINIMUM AND 3.755 INCHES MAXIMUM
AFQL	DISTANCE FROM MOUNTING SHOULDER TO REAR FACE	0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM
AFQQ	MOUNTING FACILITY THICKNESS	0.188 INCHES NOMINAL
AFQR	THREADED DEVICE TYPE	MOUNTING STUD
AFQW	MATING END QUANTITY	1
AFQZ	CONTACT REMOVABILITY	NONREMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS
AFRT	SHELL TYPE	SOLID
AFRV	CONNECTOR LOCKING METHOD	FRICTION
CMLP	THREAD QUANTITY PER INCH	32
CQJX	NOMINAL THREAD SIZE	0.190 INCHES
CQTM	TERMINAL LOCATION	BACK SINGLE MATING END ALL CONTACT GROUPINGS
CQTZ	CONTACT MATERIAL	COPPER ALLOY SINGLE MATING END ALL CONTACT GROUPINGS
CQYH	CONTACT SURFACE TREATMENT	SILVER SINGLE MATING END ALL CONTACT GROUPINGS
CRBJ	CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END ALL CONTACT GROUPINGS
CSCF	TERMINAL TYPE	THREADED STUD SINGLE MATING END ALL CONTACT GROUPINGS
CSPT	SHELL MATERIAL	ALUMINUM ALLOY 356.0
CSWM	SHELL SURFACE TREATMENT	ANODIZE
CTBC	SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625,TY 1 OR TY 2 MIL SPEC SINGLE TREATMENT RESPONSE
CTHH	SHELL MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-596 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-601 FED SPEC SINGLE MATERIAL RESPONSE
CXCG	INCLUDED CONTACT QUANTITY	2 SINGLE MATING END 1ST CONTACT GROUPING
CXCG	INCLUDED CONTACT QUANTITY	4 SINGLE MATING END 2ND CONTACT GROUPING
CXCL	INCLUDED CONTACT TYPE	ROUND PIN SINGLE MATING END ALL CONTACT GROUPINGS
PMLC	PRECIOUS MATERIAL AND LOCATION	CONTACT SURFACES SILVER
PMWT	PRECIOUS MATERIAL AND WEIGHT	0.030 SILVER GRAINS,TROY
PRMT	PRECIOUS MATERIAL	SILVER
THSD	THREAD SERIES DESIGNATOR	UNF

Schedule B & Trade

End Use : 20005	Electric apparatus
Schedule B : 8538907080 (NAICS 335314)	Parts suitable for use solely or principally with the apparatus for heading 8535, 8536, 8537, nesoi
SITC : 77282	Parts of electrical apparatus for switching or protecting electrical circuits for making connections to or in electrical circuits, n.E.S.

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	S - Item contains silver.

NSN Management Codes

AAC	D
Classification Control	U
MGMT_CTL	Q2200x-
Quantity per pack	1
Repariability	Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. refer to appropriate manuals or directives for specific instructions.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	061680 - Elec wiring plugs etc
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	658 - Electrical appliances, small