We've received your request for W200011 (described as Clip Spring Tension), manufactured by Sora Power Inc with CAGE code 13058. This part is registered under NSN 5340-01-298-3233, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-298-3233, NCB code 01 (origin: USA), and INC 20815. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your W200011 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-298-3233 Item PartTypeName: CLIP,SPRING TENSION | 5340 | 012983233 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 4572-74-127-1N | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABKW | OVERALL HEIGHT | 1.270 INCHES MAXIMUM |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| AZWE | DISTANCE FROM LOOP CENTER TO END | 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| BPCM | SMALLEST WIDTH | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | TWO 90.0 DEG TABS ON CLIP TO PREVENT SLIPPAGE FROM END OF CLIP |
| MATT | MATERIAL | COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL |
| ABGL | WIDTH | 1.265 INCHES MINIMUM AND 1.285 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-N-290 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAUB | HOLE DIAMETER | 0.185 INCHES MINIMUM AND 0.191 INCHES MAXIMUM |
| ABRY | LENGTH | 0.830 INCHES MAXIMUM |
| CJYS | LOOP/HOLDING DIMENSION | 0.725 INCHES MINIMUM AND 0.755 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B194 ASSN STD ALL MATERIAL RESPONSES OVERALL |
| ABPX | MATERIAL THICKNESS | 0.032 INCHES NOMINAL |
| SFTT | SURFACE TREATMENT | NICKEL OVERALL |
| End Use : 12300 | Finished metal shapes |
|---|---|
| Schedule B : 7326908530 (NAICS 332999) | Hangers and similar supports for tubes and pipes, of iron or steel |
| SITC : 69969 | Articles of iron or steel, n.E.S. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | J |
|---|---|
| Classification Control | U |
| MGMT_CTL | 9b----- |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | Q - 70.0 |
| NMFC: | 094220 - Clips sheet steel noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 713 - Metal hardware |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
