We've received your request for FD8264 (described as Cylinder Assembly H), manufactured by Spalla Inc with CAGE code 22852. This part is registered under NSN 2530-00-391-3984, classified in FSG 25 Vehicular Equipment Components / FSC 2530 Vehicular Brake Steering Axle Wheel and Track Components. Our verification process will confirm traceability through supporting identifiers including NIIN 00-391-3984, NCB code 00 (origin: USA), and INC 10862. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your FD8264 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2530-00-391-3984 Item PartTypeName: CYLINDER ASSEMBLY,HYDRAULIC BRAK | 2530 | 003913984 | P | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | 0 | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 01760-0049 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABDR | MOUNTING PROVISION | THREADED MOUNTING HOLES |
| ABKW | OVERALL HEIGHT | 1.980 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 2.660 INCHES NOMINAL |
| AFDS | LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 1.880 INCHES NOMINAL |
| AFDT | SHORTEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 1.880 INCHES NOMINAL |
| AFDV | LONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS | 1.360 INCHES NOMINAL |
| AKBM | MOUNTING FACILITY THREAD CLASS | 2B |
| AKBN | MOUNTING FACILITY THREAD DIRECTION | RIGHT-HAND |
| AMQZ | COMPRESSED LENGTH | 3.500 INCHES NOMINAL |
| ASBP | BORE TYPE | STEPPED |
| ATEM | EXTENDED LENGTH | 3.500 INCHES NOMINAL |
| BBBW | MOUNTING PROVISION ARRANGEMENT STYLE | THREE HOLE TRIANGULAR |
| BBJX | MOUNTING POSITION | LEFT |
| CBBL | FEATURES PROVIDED | RUBBER BOOT |
| CDTD | MOUNTING FACILITY THREAD SERIES DESIGNATOR | UNC |
| CDTF | MOUNTING FACILITY THREAD DIAMETER | 0.312 INCHES NOMINAL |
| CDTG | MOUNTING FACILITY THREAD QUANTITY PER INCH | 18 |
| CKSD | DESIGN CHARACTERISTICS | DOUBLE ACTING SINGLE CYLINDER |
| CKSF | FIRST PISTON ROD END STYLE | SLOT TYPE ALL WORKING ENDS |
| CLLP | PISTON ROD END SIMILARITY | IDENTICAL |
| CLMG | FIRST END FORK DEPTH | 0.281 INCHES NOMINAL ALL WORKING ENDS |
| CLML | MOUNTING TYPE AND LOCATION | FLANGE CENTER SECTION |
| CLMN | MOUNTING FACILITY THREAD LENGTH | 0.380 INCHES NOMINAL |
| CLMS | PORT LOCATION AND QUANTITY | 1 CENTER SECTION |
| CLMT | PORT STYLE | GASKET SEAL SINGLE PORT |
| CLMW | PORT THREAD SERIES DESIGNATOR | UNF SINGLE PORT |
| CLMX | PORT THREAD DIAMETER | 0.438 INCHES NOMINAL SINGLE PORT |
| CLMY | PORT THREAD QUANTITY PER INCH | 20 SINGLE PORT |
| CLNB | PORT THREAD CLASS | 2B SINGLE PORT |
| CLND | BLEEDING FEATURE QUANTITY | 1 |
| End Use : 30230 | Other parts and accessories of vehicles |
|---|---|
| Schedule B : 8708300050 (NAICS 336340) | Brakes and servo-brakes and parts, of motor vehicles of headings 8701 to 8705 |
| SITC : 78433 | Brakes and servo-brakes and parts thereof for tractors, motor cars and other motor vehicles, etc. |
| ADPE | Represents items with no adp components |
|---|---|
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | V |
|---|---|
| Classification Control | U |
| MGMT_CTL | 9c----- |
| Quantity per pack | * special requirements. |
| Repariability | |
| Shelf Life | N/A |
| SOS | S9c |
| Unit of Measure | Ea |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | W - Rating variable |
| NMFC: | 133300 - Machinery/machines noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 885 - Vehicles, mhe, road construction, repair parts and components |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
