AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
+1-714-705-4780 sales@aerospaceexchange.com
QUICK QUOTE HERE
Home   /   Sps Technologies Inc    /   Part NAS1203 12

Buy NAS1203 12 Screw Close Toleran part by Sps Technologies Inc

Part Number:  NAS1203 12
Manufacturer:  sps technologies inc
NSN:  5305-00-660-3149
NIIN:  006603149
Item Name :  screw close toleran
CAGE Code:  80539
FSC:  5305 Screws
INC Code:  29294
Country:  USA
NCB Code:  00
FSG:  53 Hardware and Abrasives

We've received your request for NAS1203 12 (described as Screw Close Toleran), manufactured by Sps Technologies Inc with CAGE code 80539. This part is registered under NSN 5305-00-660-3149, classified in FSG 53 Hardware and Abrasives / FSC 5305 Screws. Our verification process will confirm traceability through supporting identifiers including NIIN 00-660-3149, NCB code 00 (origin: USA), and INC 29294. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your NAS1203 12 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for NAS1203 12

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload  

How to Begin the Quotation Process

  1. Fill out and submit the form for part NAS1203 12, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number NAS1203 12 with NSN 5305-00-660-3149, 5305006603149

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5305-00-660-3149

Item PartTypeName:

SCREW,CLOSE TOLERANCE

53050066031490N
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
NAS1203-12225

Characteristics Data of NSN 5305-00-660-3149, 5305006603149

MRCCriteriaCharacteristic
AAJDTHREAD CLASS3A
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTH0.276 INCHES MINIMUM
AASBFASTENER LENGTH1.011 INCHES MINIMUM AND 1.041 INCHES MAXIMUM
AASKHEAD STYLEFLAT COUNTERSUNK
AASLHEAD DIAMETER0.328 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
AAURGRIP DIAMETER0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
ABQZINTERNAL DRIVE STYLECROSS RECESS TYPE 1
AHYMNOMINAL THREAD DIAMETER0.190 INCHES
ANEEGRIP LENGTH0.750 INCHES NOMINAL
CMLPTHREAD QUANTITY PER INCH32
CQBCMINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
CQFMHARDNESS RATING36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
CRSQCOUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
MATTMATERIALSTEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
SFTTSURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY2 CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THSDTHREAD SERIES DESIGNATORUNF
ZZZKSPECIFICATION/STANDARD DATA80205-NAS1203 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

Find Most Relevant Part No of NAS1203 12

  • NAS-10
  • International Rectifier Corporation
  • NAS 1023D4
  • Nut Self Locking Pl
  • National Aerospace Standards Com
  • NAS 1057
  • Spacer Sleeve
  • National Aerospace Standards Com
  • NAS 1063
  • Insulator Plate
  • National Aerospace Standards Com
  • NAS 1142-4
  • Screw Close Toleran
  • National Aerospace Standards Com
  • NAS 1142-6
  • Screw Close Toleran
  • National Aerospace Standards Com
  • NAS 1143 12
  • Screw Close Toleran
  • National Aerospace Standards Com
  • NAS 1143-14
  • Screw Close Toleran
  • National Aerospace Standards Com
  • NAS 1143-16
  • Screw Close Toleran
  • National Aerospace Standards Com
  • NAS 1200S
  • Signal D Recorder-reproducer Set
  • Hp Hewlett Packard Corp

Recently Viewed Parts

NAS1203 12

RFQ

Part NAS1203 12 With Different Manufacturers

NAS1203-12
RFQ
NAS1203-12
RFQ
NAS1203-12
RFQ
NAS1203-12
RFQ
NAS1203-12
RFQ

BROWSE BY CATEGORIES

Complete Aerospace and NSN Parts Purchasing Platform

asach

AS9120B and ISO 9001:2015
asap_member

Aviation Suppliers Association Member
certified_company

FAA AC 0056B Accredited
as6081_supplier

AS 6081:2012 Certification
esd_association

ESD S20.20-2014 Certification

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top