Buy MS20036-7 Bolt Machine part by Sps Technologies Inc

Part Number: MS20036-7

Alternate P/N: MS200367

Manufacturer: sps technologies inc

NSN: 5306-00-823-5900

NIIN: 008235900

Item Name : bolt machine

CAGE Code: 80539

FSC: 5306 Bolts

INC Code: 01847

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for MS20036-7 (described as Bolt Machine), manufactured by Sps Technologies Inc with CAGE code 80539. This part is registered under NSN 5306-00-823-5900, classified in FSG 53 Hardware and Abrasives / FSC 5306 Bolts. Our verification process will confirm traceability through supporting identifiers including NIIN 00-823-5900, NCB code 00 (origin: USA), and INC 01847. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MS20036-7 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MS20036-7

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part MS20036-7, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number MS20036-7 with NSN 5306-00-823-5900, 5306008235900

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5306-00-823-5900 Item PartTypeName: BOLT,MACHINE	5306	008235900	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
LE20036-7	2	9	5

Characteristics Data of NSN 5306-00-823-5900, 5306008235900

MRC	Criteria	Characteristic
AASA	THREAD LENGTH	0.672 INCHES MINIMUM
AASB	FASTENER LENGTH	1.547 INCHES NOMINAL
CBBL	FEATURES PROVIDED	FINISHED HEAD
CMLP	THREAD QUANTITY PER INCH	24
CQBC	MINIMUM TENSILE STRENGTH	110000 POUNDS PER SQUARE INCH
CQHQ	MINIMUM YIELD STRENGTH	90000 POUNDS PER SQUARE INCH
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-B-7874 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
THSD	THREAD SERIES DESIGNATOR	UNF
AASU	HEAD HEIGHT	0.203 INCHES MINIMUM AND 0.235 INCHES MAXIMUM
AATB	WIDTH BETWEEN FLATS	0.553 INCHES MINIMUM AND 0.565 INCHES MAXIMUM
AHYM	NOMINAL THREAD DIAMETER	0.375 INCHES
ANEE	GRIP LENGTH	0.875 INCHES NOMINAL
MATT	MATERIAL	STEEL CORROSION RESISTING OVERALL
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL
SPCL	SPECIAL TEST FEATURES	RAPTURE STRENGTH AT 1200 DEG F SHALL NOT BE LESS THAN 47000 PSI IN 100 HRS
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASK	HEAD STYLE	HEXAGON

Schedule B & Trade

End Use : 12110	Iron and steel products, other
Schedule B : 7318152000 (NAICS 332722)	Bolts and bolts and their nuts or washers exported in the same shipment
SITC : 69421	Screws, bolts, nuts, screw hooks, rivets, washers and similar articles, threaded, of iron or steel

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	V
Classification Control	U
MGMT_CTL	T2200x-
Quantity per pack	100
Repariability	This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	093486 - Bolts, nuts or screws, noi (sub 3)
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	573 - Bolts or nuts (iron or steel),(less than 35 feet)