Buy MS21297-06013 Bolt Close Toleranc part by Sps Technologies Inc

Part Number: MS21297-06013

Alternate P/N: MS2129706013

Manufacturer: sps technologies inc

NSN: 5306-01-063-3786

NIIN: 010633786

Item Name : bolt close toleranc

CAGE Code: 27624

FSC: 5306 Bolts

INC Code: 27851

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

We've received your request for MS21297-06013 (described as Bolt Close Toleranc), manufactured by Sps Technologies Inc with CAGE code 27624. This part is registered under NSN 5306-01-063-3786, classified in FSG 53 Hardware and Abrasives / FSC 5306 Bolts. Our verification process will confirm traceability through supporting identifiers including NIIN 01-063-3786, NCB code 01 (origin: USA), and INC 27851. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MS21297-06013 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MS21297-06013

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part MS21297-06013, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number MS21297-06013 with NSN 5306-01-063-3786, 5306010633786

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5306-01-063-3786 Item PartTypeName: BOLT,CLOSE TOLERANCE	5306	010633786	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
5306PL1497625	2	9	6

Characteristics Data of NSN 5306-01-063-3786, 5306010633786

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.649 INCHES MINIMUM AND 0.699 INCHES MAXIMUM
AASB	FASTENER LENGTH	1.471 INCHES MINIMUM AND 1.501 INCHES MAXIMUM
AASK	HEAD STYLE	SPLINE EXTENDED WASHER
AASU	HEAD HEIGHT	0.327 INCHES MINIMUM AND 0.347 INCHES MAXIMUM
AATB	WIDTH BETWEEN FLATS	0.423 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
AATC	EXTENDED WASHER DIAMETER	0.691 INCHES MINIMUM AND 0.701 INCHES MAXIMUM
AATD	EXTENDED WASHER THICKNESS	0.044 INCHES MINIMUM AND 0.064 INCHES MAXIMUM
AAUR	GRIP DIAMETER	0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM
AHYM	NOMINAL THREAD DIAMETER	0.375 INCHES
ANEE	GRIP LENGTH	0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM
CMLP	THREAD QUANTITY PER INCH	24
CQFM	HARDNESS RATING	46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
CSYM	SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
CSYM	SURFACE FINISH	32.0 MICROINCHES GRIP
MATT	MATERIAL	STEEL COMP H11 OVERALL
SFTT	SURFACE TREATMENT	CADMIUM OVERALL
THSD	THREAD SERIES DESIGNATOR	UNJF

Schedule B & Trade

End Use : 12110	Iron and steel products, other
Schedule B : 7318152000 (NAICS 332722)	Bolts and bolts and their nuts or washers exported in the same shipment
SITC : 69421	Screws, bolts, nuts, screw hooks, rivets, washers and similar articles, threaded, of iron or steel

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	V
Classification Control	U
MGMT_CTL	Sf9sx-v
Quantity per pack	25
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	093486 - Bolts, nuts or screws, noi (sub 3)
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	573 - Bolts or nuts (iron or steel),(less than 35 feet)