Buy MTL2C440BCM Nut Self Locking Pl part by Sps Technologies Inc

Part Number: MTL2C440BCM

Manufacturer: sps technologies inc

NSN: 5310-00-762-6134

NIIN: 007626134

Item Name : nut self locking pl

CAGE Code: 11815

FSC: 5310 Nuts and Washers

INC Code: 05280

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for MTL2C440BCM (described as Nut Self Locking Pl), manufactured by Sps Technologies Inc with CAGE code 11815. This part is registered under NSN 5310-00-762-6134, classified in FSG 53 Hardware and Abrasives / FSC 5310 Nuts and Washers. Our verification process will confirm traceability through supporting identifiers including NIIN 00-762-6134, NCB code 00 (origin: USA), and INC 05280. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MTL2C440BCM requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MTL2C440BCM

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part MTL2C440BCM, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number MTL2C440BCM with NSN 5310-00-762-6134, 5310007626134

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5310-00-762-6134 Item PartTypeName: NUT,SELF-LOCKING,PLATE	5310	007626134	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
M 12700E-40BC	3	1	5

Characteristics Data of NSN 5310-00-762-6134, 5310007626134

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3B
AAJF	THREAD DIRECTION	RIGHT-HAND
AAUM	LOCKING FEATURE	PREVAILING TORQUE ALL METAL DESIGN
ABAJ	LUBRICATION	DRY FILM LUBRICANT
ACTA	NUT STYLE	PLATE
ADEA	NUT HEIGHT	0.143 INCHES MAXIMUM
ADEB	PLATE THICKNESS	0.040 INCHES MAXIMUM
ADEC	PLATE WIDTH	0.140 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
ADFW	DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER	0.203 INCHES NOMINAL
CMLP	THREAD QUANTITY PER INCH	40
CQJX	NOMINAL THREAD SIZE	0.112 INCHES
MATT	MATERIAL	IRON ALLOY 660 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
ABTB	MOUNTING HOLE DIAMETER	0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM
ACVN	NUT LENGTH	0.630 INCHES MAXIMUM
ADFP	NUT MOUNTING PROVISION	COUNTERSUNK HOLES
ADFR	MOUNTING PROVISION LOCATION	OPPOSITE NUT PROJECTION SIDE
ADFU	MOUNTING HOLE ARRANGEMENT STYLE	2 HOLES
ADFY	CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH	0.404 INCHES MINIMUM AND 0.408 INCHES MAXIMUM
AZKQ	TEMP RATING	450.0 DEG FAHRENHEIT NOMINAL
BZRR	THREAD SERIES	UNJC
CSSM	MOUNTING HOLE COUNTERSINK ANGLE	98.0 DEGREES MINIMUM AND 102.0 DEGREES MAXIMUM
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL

Schedule B & Trade

End Use : 12300	Finished metal shapes
Schedule B : 7318160000 (NAICS 332722)	Nuts of iron or steel
SITC : 69421	Screws, bolts, nuts, screw hooks, rivets, washers and similar articles, threaded, of iron or steel

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	T2200x-
Quantity per pack	1
Repariability	This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	093486 - Bolts, nuts or screws, noi (sub 3)
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	573 - Bolts or nuts (iron or steel),(less than 35 feet)