Buy HLT209-6-4 Pin Rivet part by Sps Technologies Inc

Part Number: HLT209-6-4

Alternate P/N: HLT20964

Manufacturer: sps technologies inc

NSN: 5320-01-253-4200

NIIN: 012534200

Item Name : pin rivet

CAGE Code: 56878

FSC: 5320 Rivets

INC Code: 67165

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

We've received your request for HLT209-6-4 (described as Pin Rivet), manufactured by Sps Technologies Inc with CAGE code 56878. This part is registered under NSN 5320-01-253-4200, classified in FSG 53 Hardware and Abrasives / FSC 5320 Rivets. Our verification process will confirm traceability through supporting identifiers including NIIN 01-253-4200, NCB code 01 (origin: USA), and INC 67165. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your HLT209-6-4 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for HLT209-6-4

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part HLT209-6-4, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 5320-01-253-4200, 5320012534200

MRC	Criteria	Characteristic
AAJF	THREAD DIRECTION	RIGHT-HAND
AASB	FASTENER LENGTH	0.600 INCHES MINIMUM AND 0.620 INCHES MAXIMUM
AATB	WIDTH BETWEEN FLATS	0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM
AAZG	HEAD MAJOR DIAMETER	0.325 INCHES MINIMUM AND 0.330 INCHES MAXIMUM
ANEE	GRIP LENGTH	0.245 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
CQJX	NOMINAL THREAD SIZE	0.190 INCHES
CRSQ	COUNTERSINK ANGLE	100.0 DEGREES NOMINAL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS4928 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THSD	THREAD SERIES DESIGNATOR	UNJF
AAJD	THREAD CLASS	3A
AASK	HEAD STYLE	FLUSH COUNTERSUNK
AAZE	SHANK DIAMETER	0.2177 INCHES MINIMUM AND 0.2182 INCHES MAXIMUM
AAZF	SHANK STYLE	PIN-RIVET, STRAIGHT, THREADED
CMLP	THREAD QUANTITY PER INCH	32
CQBC	MINIMUM TENSILE STRENGTH	2000 POUNDS PER SQUARE INCH
CQSX	SHEAR STRENGTH	7100 DOUBLE POUNDS PER SQUARE INCH
MATT	MATERIAL	TITANIUM ALLOY UNS R56400 OVERALL

Schedule B & Trade

End Use : 12290	Nonferrous metals, other
Schedule B : 8108908000 (NAICS 331491)	Other wrought titanium, nesoi
SITC : 69985	Titanium, wrought, and articles of titanium, n.E.S.

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown