Buy SL2609-3-100 Spacer Sleeve part by Sps Technologies Inc

Part Number: SL2609-3-100

Alternate P/N: SL26093100

Manufacturer: sps technologies inc

NSN: 5365-00-284-2053

NIIN: 002842053

Item Name : spacer sleeve

CAGE Code: 97393

FSC: 5365 Bushings Rings Shims and Spacers

INC Code: 13207

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for SL2609-3-100 (described as Spacer Sleeve), manufactured by Sps Technologies Inc with CAGE code 97393. This part is registered under NSN 5365-00-284-2053, classified in FSG 53 Hardware and Abrasives / FSC 5365 Bushings Rings Shims and Spacers. Our verification process will confirm traceability through supporting identifiers including NIIN 00-284-2053, NCB code 00 (origin: USA), and INC 13207. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your SL2609-3-100 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for SL2609-3-100

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part SL2609-3-100, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number SL2609-3-100 with NSN 5365-00-284-2053, 5365002842053

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5365-00-284-2053 Item PartTypeName: SPACER,SLEEVE	5365	002842053	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
10118474	6	9	6

Characteristics Data of NSN 5365-00-284-2053, 5365002842053

MRC	Criteria	Characteristic
ABHP	OVERALL LENGTH	0.9950 INCHES MINIMUM AND 1.0050 INCHES MAXIMUM
ADAR	BODY OUTSIDE DIAMETER	0.3200 INCHES MINIMUM AND 0.3300 INCHES MAXIMUM
ADAS	BODY INSIDE DIAMETER	0.1970 INCHES NOMINAL
AGFF	FLANGE WIDTH	0.0910 INCHES NOMINAL
BZLX	CORNER SHAPE	SQUARE ALL CORNERS
FEAT	SPECIAL FEATURES	ELONGATED FLANGE 0.9850 INCHES NOMINAL LONG,0.3960 INCHES NOMINAL WIDE,TWO BOLT HOLES 0.0980 INCHES NOMINAL DIAMETER LOCATED 0.3430 INCHES NOMINAL FROM CENTER OF INSIDE DIAMETER TO CENTER OF BOLT HOLE EITHER END
MATT	MATERIAL	ALUMINUM ALLOY 6061 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-A-12545,TEMPER T6 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SFTT	SURFACE TREATMENT	CHROMATE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-5541,CLASS 1A OR CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL

Schedule B & Trade

End Use : 12300	Finished metal shapes
Schedule B : 7616995095 (NAICS 332999)	Articles of aluminum nesoi
SITC : 69979	Articles of aluminum, n.E.S.

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	Sf9sx-n
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	J - 100.0
NMFC:	013120 - Aluminum article noi sub 6
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	713 - Metal hardware