Buy 03A217-14D70 Bolt Shoulder part by Standard Engineering Corp

Part Number: 03A217-14D70

Alternate P/N: 03A21714D70

Manufacturer: standard engineering corp

NSN: 5306-01-375-7129

NIIN: 013757129

Item Name : bolt shoulder

CAGE Code: 0JBJ1

FSC: 5306 Bolts

INC Code: 04905

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

We've received your request for 03A217-14D70 (described as Bolt Shoulder), manufactured by Standard Engineering Corp with CAGE code 0JBJ1. This part is registered under NSN 5306-01-375-7129, classified in FSG 53 Hardware and Abrasives / FSC 5306 Bolts. Our verification process will confirm traceability through supporting identifiers including NIIN 01-375-7129, NCB code 01 (origin: USA), and INC 04905. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 03A217-14D70 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 03A217-14D70

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 03A217-14D70, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 03A217-14D70 with NSN 5306-01-375-7129, 5306013757129

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5306-01-375-7129 Item PartTypeName: BOLT,SHOULDER	5306	013757129	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
03A217-14D70	5	2	5

Characteristics Data of NSN 5306-01-375-7129, 5306013757129

MRC	Criteria	Characteristic
SHOULDER	AASB	FASTENER LENGTH5 549 INCHES MINIMUM AND 5 560 INCHES MAXIMUM
SHOULDER	AATN	SHOULDER DIAMETER0 998 INCHES MINIMUM FIRST SHOULDER AND 0 999 INCHES MAXIMUM FIRST SHOULDER
SHOULDER	AHYM	NOMINAL THREAD DIAMETER0 875 INCHES
SHOULDER	CQBC	MINIMUM TENSILE STRENGTH95000 POUNDS PER SQUARE INCH
SHOULDER	CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER5 365 INCHES MINIMUM FIRST HOLE AND 5 419 INCHES MAXIMUM FIRST HOLE
SHOULDER	AAJF	THREAD DIRECTIONRIGHT-HAND
SHOULDER	AASA	THREAD LENGTH1 184 INCHES NOMINAL
SHOULDER	AATX	SHOULDER LENGTH4 365 INCHES MINIMUM FIRST SHOULDER AND 4 385 INCHES MAXIMUM FIRST SHOULDER
SHOULDER	AAWB	SHANK UNTHREADED HOLE DIAMETER0 141 INCHES MINIMUM FIRST HOLE AND 0 151 INCHES MAXIMUM FIRST HOLE
SHOULDER	MATT	MATERIALIRON ALLOY 660 OVERALL
SHOULDER	MDCL	MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SHOULDER	SFTT	SURFACE TREATMENTPASSIVATE OVERALL
SHOULDER	STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SHOULDER	AATB	WIDTH BETWEEN FLATS1 427 INCHES MINIMUM AND 1 440 INCHES MAXIMUM
SHOULDER	AAJD	THREAD CLASS3A
SHOULDER	AASK	HEAD STYLEDISHED HEXAGON
SHOULDER	AASU	HEAD HEIGHT0 500 INCHES MINIMUM AND 0 515 INCHES MAXIMUM
SHOULDER	CMLP	THREAD QUANTITY PER INCH14
SHOULDER	CWYB	SHOULDER SHAPEROUND FIRST SHOULDER
SHOULDER	THSD	THREAD SERIES DESIGNATORUNJF

Schedule B & Trade

End Use : 12110	Iron and steel products, other
Schedule B : 7318152000 (NAICS 332722)	Bolts and bolts and their nuts or washers exported in the same shipment
SITC : 69421	Screws, bolts, nuts, screw hooks, rivets, washers and similar articles, threaded, of iron or steel

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	J
Classification Control	U
MGMT_CTL	-------
Quantity per pack	No qup
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	093486 - Bolts, nuts or screws, noi (sub 3)
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	573 - Bolts or nuts (iron or steel),(less than 35 feet)