We've received your request for S7P346 20 (described as Gasket), manufactured by Stillman Seal Corporation with CAGE code 95272. This part is registered under NSN 5330-00-805-7704, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-805-7704, NCB code 00 (origin: USA), and INC 04522. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your S7P346 20 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5330-00-805-7704 Item PartTypeName: GASKET | 5330 | 008057704 | Y | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MS27195-20 | 6 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT AND 160.0 DEG FAHRENHEIT |
| ABKG | BOLT CIRCLE DIAMETER | 2.337 INCHES MINIMUM AND 2.347 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 2.869 INCHES MINIMUM AND 2.879 INCHES MAXIMUM |
| ADVC | SIDE RADIUS FROM GASKET CENTER | 0.905 INCHES MINIMUM AND 0.937 INCHES MAXIMUM |
| ADWF | GAGE RING THICKNESS | 0.076 INCHES MINIMUM AND 0.084 INCHES MAXIMUM |
| ANYN | ELONGATION PERCENTAGE | 250 MAXIMUM |
| CQFM | HARDNESS RATING | 70.0 SHORE DUROMETER A NOMINAL OVERALL |
| MATT | MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-7362 COMP A TY 2 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | ANODIZE OVERALL |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | METAL AND SYNTHETIC RUBBER |
| AAUB | HOLE DIAMETER | 0.261 INCHES MINIMUM AND 0.276 INCHES MAXIMUM |
| ABVL | APERTURE DIAMETER | 1.133 INCHES MINIMUM AND 1.143 INCHES MAXIMUM |
| ADPW | OUTSIDE CORNER RADIUS | 0.250 INCHES MINIMUM AND 0.282 INCHES MAXIMUM |
| ADUU | OUTSIDE CORNER INVERTED RADIUS | 0.250 INCHES MINIMUM AND 0.282 INCHES MAXIMUM |
| ADVM | CROSS-SECTIONAL THICKNESS | 0.120 INCHES NOMINAL |
| AECS | BOLT HOLE QUANTITY | 4 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYA MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | NON-CIRCULAR |
| ADPE | Represents items with no adp components |
|---|---|
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | D |
|---|---|
| Classification Control | U |
| MGMT_CTL | T2200x- |
| Quantity per pack | 1 |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | 180 mo. |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | W - Rating variable |
| NMFC: | 194120 - Washers/gaskets/pckg dvcs noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 713 - Metal hardware |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
