Buy 259SM117 Resistor Fixed Wire part by Struthers Dunn Inc

Part Number:  259SM117
Manufacturer:  struthers dunn inc
NIIN:  012302133
Item Name :  resistor fixed wire
CAGE Code:  00213
INC Code:  37403
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 259SM117 (described as Resistor Fixed Wire), manufactured by Struthers Dunn Inc with CAGE code 00213. This part is registered under NSN 5905-01-230-2133, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5905 Resistors. Our verification process will confirm traceability through supporting identifiers including NIIN 01-230-2133, NCB code 01 (origin: USA), and INC 37403. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 259SM117 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 259SM117

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 259SM117, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 259SM117 with NSN 5905-01-230-2133, 5905012302133

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-01-230-2133

Item PartTypeName:

RESISTOR,FIXED,WIRE WOUND,INDUCT

59050123021330NA
CIICHCCESDPMICCriticalityENAC
UAA0
Part NumberISCRNVCRNCCHCCMSDSSADC
259SM117E8E

Characteristics Data of NSN 5905-01-230-2133, 5905012302133

MRCCriteriaCharacteristic
AAPETEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS-50.0 TO 50.0
AAPPELECTRICAL RESISTANCE2.490 OHMS
AAPQRESISTANCE TOLERANCE IN PERCENT-1.000 TO 1.000
AAQGAMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER275.0
AAQHTEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS-55.0 TO 275.0
AARGRELIABILITY INDICATORESTABLISHED
AARHRELIABILITY FAILURE RATE LEVEL IN PERCENT0.001
ABJTTERMINAL LENGTH1.500 INCHES MINIMUM
ABPMBODY DIAMETER0.085 INCHES NOMINAL
ADAQBODY LENGTH0.250 INCHES NOMINAL
AEFBPOWER DISSIPATION RATING IN WATTS1.000 FREE AIR
AEHYAMBIENT TEMP AT FULL RATED POWER25.0 DEG CELSIUS
AGAVEND ITEM IDENTIFICATIONF/TF-15A ACFT
AKNAINCLOSURE TYPEENCAPSULATED
CBMECUBIC MEASURE0.002 CUBIC INCHES
CSCFTERMINAL TYPEWIRE LEAD
PKWTUNPACKAGED UNIT WEIGHT0.35 GRAMS
STYLSTYLE DESIGNATORAXIAL TERMINAL EACH END
TESTTEST DATA DOCUMENT81349-MIL-R-39007 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI
ZZZKSPECIFICATION/STANDARD DATA81349-MIL-R-39007/9 GOVERNMENT SPECIFICATION

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533390080 (NAICS 334416) Wirewound variable resistors, nesoi
SITC : 77233 Wirewound electrical variable resistors (including rheostats and potentiometers)

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: 3 - Electrostatic sensitive device (esd)
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top