Buy TDA-711 Relay Electromagnet part by Struthers Dunn Inc

Part Number:  TDA-711
Alternate P/N:  TDA711
Manufacturer:  struthers dunn inc
NIIN:  011335465
Item Name :  relay electromagnet
CAGE Code:  78290
INC Code:  32512
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for TDA-711 (described as Relay Electromagnet), manufactured by Struthers Dunn Inc with CAGE code 78290. This part is registered under NSN 5945-01-133-5465, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5945 Relays and Solenoids. Our verification process will confirm traceability through supporting identifiers including NIIN 01-133-5465, NCB code 01 (origin: USA), and INC 32512. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your TDA-711 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for TDA-711

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part TDA-711, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number TDA-711 with NSN 5945-01-133-5465, 5945011335465

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5945-01-133-5465

Item PartTypeName:

RELAY,ELECTROMAGNETIC

5945011335465N
CIICHCCESDPMICCriticalityENAC
A
Part NumberISCRNVCRNCCHCCMSDSSADC
CTD210-1019125

Characteristics Data of NSN 5945-01-133-5465, 5945011335465

MRCCriteriaCharacteristic
ABHPOVERALL LENGTH1.290 INCHES MAXIMUM
ABKWOVERALL HEIGHT2.986 INCHES MAXIMUM
ABMKOVERALL WIDTH1.250 INCHES NOMINAL
ADTVCASE MATERIALMETAL
ADZCENVIRONMENTAL PROTECTIONHERMETIC
AFJNFRAGILITY FACTORMODERATELY RUGGED
AKDXWINDING QUANTITY1
AKSLPURPOSE FOR WHICH DESIGNEDGENERAL
APCNCOIL QUANTITY1
APNPDUTY TYPECONTINUOUS
APNQARC QUENCHING METHODAIR
AXHRMOUNTING FACILITY TYPE AND QUANTITY1 PLUG-IN TERMINAL SINGLE MOUNTING FACILITY
BBRGSTORAGE TYPEGENERAL PURPOSE WAREHOUSE
CBBLFEATURES PROVIDEDPOLARIZED
CRNGNONPILE-UP MAIN CONTACT ARRANGEMENT2 POLE,DOUBLE THROW,ONE POSITION MOMENTARY
CRPQNOMINAL OPERATING CURRENT RATING AND TYPE150.0 MILLIAMPERES DC SINGLE WINDING
CRXHTIME DELAY0.025 SECONDS MAXIMUM FIXED RELEASE TIME
CRXHTIME DELAY0.51 SECONDS NOMINAL FIXED OPERATE TIME
CSXFOPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP28.0 VOLTS DC 25 DEG CELSIUS SINGLE WINDING
CTDLMAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE10.0 AMPERES AC AND 10.0 AMPERES DC RESISTIVE LOAD
CTDLMAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE2.0 AMPERES AC AND 2.0 AMPERES DC LAMP LOAD
CTDLMAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE4.0 AMPERES AC AND 4.0 AMPERES DC MOTOR LOAD
CTDLMAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE8.0 AMPERES AC AND 8.0 AMPERES DC INDUCTIVE LOAD
CWABMAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS115.0 AC AND 28.0 DC
TTQYTERMINAL TYPE AND QUANTITY9 PIN ALL FUNCTIONS

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536490075 (NAICS 335314) Relays, electromechanical, for a voltage exceeding 60 v but not exceeding 1, 000 v, nesoi
SITC : 77254 Relays for electrical apparatus used with electrical circuits not exceeding 1, 000 volts

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Y
Classification Control U
MGMT_CTL 9n-----
Quantity per pack No qup
Repariability
Shelf Life N/A
SOS S9e
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top