We've received your request for PH6003-1C2B (described as Capacitor Fixed Pla), manufactured by Struthers Dunn Inc with CAGE code 00213. This part is registered under NSN 5910-00-824-3996, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-824-3996, NCB code 00 (origin: USA), and INC 00006. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your PH6003-1C2B requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5910-00-824-3996 Item PartTypeName: CAPACITOR,FIXED,PLASTIC DIELECTR | 5910 | 008243996 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| PH6003-1C2B | 5 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABPM | BODY DIAMETER | 0.844 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.563 INCHES NOMINAL |
| CQBF | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 150000.0 MEGOHM-MICROFARADS |
| CQJJ | NONDERATED OPERATING TEMP | -65.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM |
| CQLZ | TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 SINGLE SECTION |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 100.0 DC SINGLE SECTION |
| CRTP | TOLERANCE RANGE PER SECTION | -2.00 TO 2.00 PERCENT SINGLE SECTION |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | 1000000.0 MEGOHM-MICROFARADS |
| CWPN | POWER FACTOR AT REFERENCE TEMP IN PERCENT | 0.0002 |
| AAQL | BODY STYLE | W/O MTG FACILITIES,AXIAL TERMINALS |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 1.625 INCHES NOMINAL |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | ELECTRODE(S) GROUNDED TO CASE,W/GND TERMINAL |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED CASE |
| CQBQ | CAPACITANCE VALUE PER SECTION | 0.600 MICROFARADS SINGLE SECTION |
| CRHD | TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -40.0 TO 40.0 SINGLE SECTION |
| CWJK | CASE MATERIAL | METAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| End Use : 20005 | Electric apparatus |
|---|---|
| Schedule B : 8532250080 (NAICS 334416) | Fixed capacitors, dielectric of paper or plastic, nesoi |
| SITC : 77866 | Paper or plastics dielectric fixed capacitors |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | J |
|---|---|
| Classification Control | U |
| MGMT_CTL | 9b----- |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | P - 77.5 |
| NMFC: | 061400 - Condensers/parts noi/capacitors |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
