Buy 353001-2 Connector Receptacl part by Super Tek Inc

Part Number:  353001-2
Alternate P/N:  3530012
Manufacturer:  super tek inc
NIIN:  011856027
Item Name :  connector receptacl
CAGE Code:  0U1T0
INC Code:  15093
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 353001-2 (described as Connector Receptacl), manufactured by Super Tek Inc with CAGE code 0U1T0. This part is registered under NSN 5935-01-185-6027, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5935 Connectors Electrical. Our verification process will confirm traceability through supporting identifiers including NIIN 01-185-6027, NCB code 01 (origin: USA), and INC 15093. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 353001-2 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 353001-2

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 353001-2, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 353001-2 with NSN 5935-01-185-6027, 5935011856027

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-01-185-6027

Item PartTypeName:

CONNECTOR,RECEPTACLE,ELECTRICAL

59350118560270PA
CIICHCCESDPMICCriticalityENAC
UAG
Part NumberISCRNVCRNCCHCCMSDSSADC
353001-2523

Characteristics Data of NSN 5935-01-185-6027, 5935011856027

MRCCriteriaCharacteristic
AAJDTHREAD CLASS2A
AAJFTHREAD DIRECTIONRIGHT-HAND
AAQLBODY STYLESTRAIGHT SHAPE,EXTERNAL COUPLING
ABKWOVERALL HEIGHT0.500 INCHES NOMINAL
ABMKOVERALL WIDTH0.500 INCHES NOMINAL
ADZCENVIRONMENTAL PROTECTIONVIBRATION RESISTANT AND SHOCK RESISTANT AND THERMAL SHOCK RESISTANT AND SALT WATER RESISTANT AND MOISTURE RESISTANT
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.102 INCHES NOMINAL
AEBWCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT0.340 INCHES NOMINAL
AEHADISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH0.340 INCHES NOMINAL
AFQKDISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.310 INCHES NOMINAL
AFQRTHREADED DEVICE TYPECOUPLING FACILITY
AFQWMATING END QUANTITY1
AFQXCONTACT POSITION ARRANGEMENT STYLEOSM SINGLE MATING END
AFQZCONTACT REMOVABILITYNONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
AFRFCONTACT MAXIMUM FREQUENCY RATING25000.0 MEGAHERTZ SINGLE MATING END SINGLE CONTACT GROUPING
AFRTSHELL TYPESOLID
AFRVCONNECTOR LOCKING METHODEXTERNALLY THREADED SHELL
AFRYRADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS50.0 SINGLE MATING END SINGLE CONTACT GROUPING
AGAVEND ITEM IDENTIFICATIONAN/FPS-117
CMLPTHREAD QUANTITY PER INCH36
CQJXNOMINAL THREAD SIZE0.250 INCHES
CQTMTERMINAL LOCATIONBACK SINGLE MATING END SINGLE CONTACT GROUPING
CQTZCONTACT MATERIALCOPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CQYHCONTACT SURFACE TREATMENTGOLD SINGLE MATING END SINGLE CONTACT GROUPING
CQZGINSERT MATERIALPLASTIC POLYTETRAFLUOROETHYLENE SINGLE MATING END
CRBJCONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204 TY 1,GRADE C MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CSCFTERMINAL TYPESOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
CSGFCONTACT MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-530 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CSPTSHELL MATERIALSTEEL COMP 303
CTHHSHELL MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE
CTKLINSERT MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-19468 MIL SPEC SINGLE MATERIAL RESPONSE AND L-P-403 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END
CXCGINCLUDED CONTACT QUANTITY1 SINGLE MATING END SINGLE CONTACT GROUPING
CXCLINCLUDED CONTACT TYPECOAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
FEATSPECIAL FEATURESMODIFIED FROM P/N 2052-1201-00 FSCM 26805; BACK DECREASED TO 0.485 IN. LG
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
PMWTPRECIOUS MATERIAL AND WEIGHT0.005 GOLD GRAINS,TROY
PRMTPRECIOUS MATERIALGOLD
THSDTHREAD SERIES DESIGNATORUNS

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8538907080 (NAICS 335314) Parts suitable for use solely or principally with the apparatus for heading 8535, 8536, 8537, nesoi
SITC : 77282 Parts of electrical apparatus for switching or protecting electrical circuits for making connections to or in electrical circuits, n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC G - Item contains gold.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061680 - Elec wiring plugs etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top