Buy 438632-2 Connector Receptacl part by Sv Microwave Inc

Part Number:  438632-2
Alternate P/N:  4386322
Manufacturer:  sv microwave inc
NIIN:  013262216
Item Name :  connector receptacl
CAGE Code:  95077
INC Code:  15093
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 438632-2 (described as Connector Receptacl), manufactured by Sv Microwave Inc with CAGE code 95077. This part is registered under NSN 5935-01-326-2216, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5935 Connectors Electrical. Our verification process will confirm traceability through supporting identifiers including NIIN 01-326-2216, NCB code 01 (origin: USA), and INC 15093. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 438632-2 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 438632-2

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 438632-2, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 438632-2 with NSN 5935-01-326-2216, 5935013262216

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-01-326-2216

Item PartTypeName:

CONNECTOR,RECEPTACLE,ELECTRICAL

59350132622160PA
CIICHCCESDPMICCriticalityENAC
UAG
Part NumberISCRNVCRNCCHCCMSDSSADC
438632-2525

Characteristics Data of NSN 5935-01-326-2216, 5935013262216

MRCCriteriaCharacteristic
AAJDTHREAD CLASS2A
AAJFTHREAD DIRECTIONRIGHT-HAND
ADZCENVIRONMENTAL PROTECTIONCORROSION RESISTANT AND VIBRATION RESISTANT AND MOISTURE RESISTANT AND THERMAL SHOCK RESISTANT
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.102 INCHES NOMINAL
AFQRTHREADED DEVICE TYPECOUPLING FACILITY
AFQZCONTACT REMOVABILITYREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
AFRYRADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS50.0 SINGLE MATING END SINGLE CONTACT GROUPING
CQTZCONTACT MATERIALCOPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
AAQLBODY STYLEANGLE SHAPE,EXTERNAL COUPLING
ABKHBUSHING DIAMETER0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
ABKQCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH0.330 INCHES MINIMUM AND 0.350 INCHES MAXIMUM
ABKWOVERALL HEIGHT0.895 INCHES MINIMUM AND 0.915 INCHES MAXIMUM
ABMKOVERALL WIDTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
AEHADISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH0.330 INCHES MINIMUM AND 0.350 INCHES MAXIMUM
AFQLDISTANCE FROM MOUNTING SHOULDER TO REAR FACE0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM
AFQNFLANGE LENGTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
AFQXCONTACT POSITION ARRANGEMENT STYLESMA SINGLE MATING END
AFRDCONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS335.0 SINGLE MATING END SINGLE CONTACT GROUPING
AFRFCONTACT MAXIMUM FREQUENCY RATING12.4 GIGAHERTZ SINGLE MATING END SINGLE CONTACT GROUPING
AWTNOPERATING TEMP RATING-65.0 DEG CELSIUS MINIMUM AND 165.0 DEG CELSIUS MAXIMUM
CQJXNOMINAL THREAD SIZE0.250 INCHES
CQTMTERMINAL LOCATIONSIDE SINGLE MATING END SINGLE CONTACT GROUPING
CQYHCONTACT SURFACE TREATMENTGOLD SINGLE MATING END SINGLE CONTACT GROUPING
CRBJCONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CSCFTERMINAL TYPECRIMP SINGLE MATING END SINGLE CONTACT GROUPING
CSWMSHELL SURFACE TREATMENTPASSIVATE
CXCGINCLUDED CONTACT QUANTITY1 SINGLE MATING END SINGLE CONTACT GROUPING
PMWTPRECIOUS MATERIAL AND WEIGHT0.005 GOLD GRAINS,TROY
PRMTPRECIOUS MATERIALGOLD
THSDTHREAD SERIES DESIGNATORUNS
AFQWMATING END QUANTITY1
CMLPTHREAD QUANTITY PER INCH36
CSPTSHELL MATERIALSTEEL CORROSION RESISTING
CXCLINCLUDED CONTACT TYPECOAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
ABHPOVERALL LENGTH0.708 INCHES NOMINAL
AFRTSHELL TYPESOLID
AFRVCONNECTOR LOCKING METHODEXTERNALLY THREADED SHELL
CQZGINSERT MATERIALPLASTIC FLUORINATED ETHYLENE PROPYLENE OR PLASTIC POLYTETRAFLUOROETHYLENE SINGLE MATING END
CTBCSHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
CTKLINSERT MATERIAL DOCUMENT AND CLASSIFICATIONL-P-389 FED SPEC 1ST MATERIAL RESPONSE OR L-P-403 FED SPEC 2ND MATERIAL RESPONSE SINGLE MATING END
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8538907080 (NAICS 335314) Parts suitable for use solely or principally with the apparatus for heading 8535, 8536, 8537, nesoi
SITC : 77282 Parts of electrical apparatus for switching or protecting electrical circuits for making connections to or in electrical circuits, n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC G - Item contains gold.

NSN Management Codes

AAC Y
Classification Control U
MGMT_CTL -------
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061680 - Elec wiring plugs etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top