Buy 40-4140-39 Filter Low Pass part by Systems And Electronics Inc

Part Number:  40-4140-39
Alternate P/N:  40414039
Manufacturer:  systems and electronics inc
NIIN:  010377814
Item Name :  filter low pass
CAGE Code:  07661
INC Code:  13911
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 40-4140-39 (described as Filter Low Pass), manufactured by Systems And Electronics Inc with CAGE code 07661. This part is registered under NSN 5915-01-037-7814, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5915 Filters and Networks. Our verification process will confirm traceability through supporting identifiers including NIIN 01-037-7814, NCB code 01 (origin: USA), and INC 13911. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 40-4140-39 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 40-4140-39

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 40-4140-39, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 40-4140-39 with NSN 5915-01-037-7814, 5915010377814

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5915-01-037-7814

Item PartTypeName:

FILTER,LOW PASS

59150103778140P
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
2132-14-4595

Characteristics Data of NSN 5915-01-037-7814, 5915010377814

MRCCriteriaCharacteristic
ABHPOVERALL LENGTH3.294 INCHES NOMINAL
ADAQBODY LENGTH2.062 INCHES NOMINAL
ADARBODY OUTSIDE DIAMETER0.750 INCHES NOMINAL
AFGAOPERATING TEMP RANGE-35.0 TO 95.0 DEG CELSIUS
AFSVAVERAGE LIFE RATING IN HOURS10000.0
AHAJREFERENCE FREQUENCY PER FUNCTION4.3 MEGAHERTZ 1ST LOW PASS 1ST FUNCTION
AHAJREFERENCE FREQUENCY PER FUNCTION4.3 MEGAHERTZ 2ND LOW PASS 2ND FUNCTION
AHAUINPUT IMPEDANCE PER FUNCTION W/LOAD91.0 OHMS 1ST LOW PASS 1ST FUNCTION
AHAUINPUT IMPEDANCE PER FUNCTION W/LOAD91.0 OHMS 2ND LOW PASS 2ND FUNCTION
AHAVOUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT91.0 OHMS 1ST LOW PASS 1ST FUNCTION
AHAVOUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT91.0 OHMS 2ND LOW PASS 2ND FUNCTION
AHBLPRINCIPAL CIRCUITRY TYPE PER FUNCTIONINDUCTANCE-CAPACITANCE 1ST LOW PASS 1ST FUNCTION
AHBLPRINCIPAL CIRCUITRY TYPE PER FUNCTIONINDUCTANCE-CAPACITANCE 2ND LOW PASS 2ND FUNCTION
AKEJMOUNTING FACILITY SCREW THREAD SERIES DESIGNATORUNF
AKNAINCLOSURE TYPEENCASED
AXHRMOUNTING FACILITY TYPE AND QUANTITY1 THREADED BUSHING
CQDRINSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS3.0 1ST LOW PASS 1ST FUNCTION
CQDRINSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS3.0 2ND LOW PASS 2ND FUNCTION
CQDWFUNCTIONAL TERMINAL TYPE AND QUANTITY1 THREADED STUD INPUT 1ST FUNCTION
CQDWFUNCTIONAL TERMINAL TYPE AND QUANTITY1 THREADED STUD OUTPUT 2ND FUNCTION
CQFCSPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION3.46 MEGAHERTZ 1ST LOW PASS AND 5.18 MEGAHERTZ 1ST LOW PASS AND 5.50 MEGAHERTZ 1ST LOW PASS AND 6.90 MEGAHERTZ 1ST LOW PASS 1ST FUNCTION
CQFCSPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION3.46 MEGAHERTZ 2ND LOW PASS AND 5.18 MEGAHERTZ 2ND LOW PASS AND 5.50 MEGAHERTZ 2ND LOW PASS AND 6.90 MEGAHERTZ 2ND LOW PASS 2ND FUNCTION
CQJXNOMINAL THREAD SIZE0.190 INCHES
CQRGBODY MATERIALMETAL
CRBBFREQUENCY BAND WIDTH PER FUNCTION3.46 MEGAHERTZ 1ST LOW PASS 1ST FUNCTION
CRBBFREQUENCY BAND WIDTH PER FUNCTION3.46 MEGAHERTZ 2ND LOW PASS 2ND FUNCTION
CRBCDISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS3.0 MAXIMUM 1ST LOW PASS AND 70.0 MINIMUM 1ST LOW PASS 1ST FUNCTION
CRBCDISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS3.0 NOMINAL 2ND LOW PASS AND 3.0 MAXIMUM 2ND LOW PASS AND 70.0 MINIMUM 2ND LOW PASS 2ND FUNCTION
STYLSTYLE DESIGNATORROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES

Schedule B & Trade

End Use : 41210 Stereo equipment, etc.
Schedule B : 8527995030 (NAICS 334310) Reception apparatus, nesoi
SITC : 76289 Radiobroadcast receivers, not combined with sound recording or reproducing apparatus nor with a clock, etc., n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061400 - Condensers/parts noi/capacitors
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top