Buy MT-154 Connector Receptacl part by T J Electronics

Part Number:  MT-154
Alternate P/N:  MT154
Manufacturer:  t j electronics
NIIN:  010437355
Item Name :  connector receptacl
CAGE Code:  33483
INC Code:  15093
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for MT-154 (described as Connector Receptacl), manufactured by T J Electronics with CAGE code 33483. This part is registered under NSN 5935-01-043-7355, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5935 Connectors Electrical. Our verification process will confirm traceability through supporting identifiers including NIIN 01-043-7355, NCB code 01 (origin: USA), and INC 15093. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MT-154 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MT-154

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part MT-154, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number MT-154 with NSN 5935-01-043-7355, 5935010437355

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-01-043-7355

Item PartTypeName:

CONNECTOR,RECEPTACLE,ELECTRICAL

59350104373550PA
CIICHCCESDPMICCriticalityENAC
UAU
Part NumberISCRNVCRNCCHCCMSDSSADC
903229-4523

Characteristics Data of NSN 5935-01-043-7355, 5935010437355

MRCCriteriaCharacteristic
AAJDTHREAD CLASS2A
AAJFTHREAD DIRECTIONRIGHT-HAND
AAQLBODY STYLESTRAIGHT SHAPE,EXTERNAL COUPLING
ABHPOVERALL LENGTH0.875 INCHES NOMINAL
ABKWOVERALL HEIGHT0.406 INCHES NOMINAL
ABMKOVERALL WIDTH0.406 INCHES NOMINAL
ADZCENVIRONMENTAL PROTECTIONMOISTURE RESISTANT AND SHOCK RESISTANT AND VIBRATION RESISTANT
AFQRTHREADED DEVICE TYPEMOUNTING BUSHING
AFQWMATING END QUANTITY1
AFQXCONTACT POSITION ARRANGEMENT STYLENONSTD SINGLE MATING END
AFQZCONTACT REMOVABILITYNONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
AFRCCONTACT MAXIMUM CURRENT RATING IN AMPS5.0 SINGLE MATING END SINGLE CONTACT GROUPING
AFRTSHELL TYPESOLID
CMLPTHREAD QUANTITY PER INCH32
CQJXNOMINAL THREAD SIZE0.312 INCHES
CQTMTERMINAL LOCATIONBACK SINGLE MATING END SINGLE CONTACT GROUPING
CQTZCONTACT MATERIALCOPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CQYHCONTACT SURFACE TREATMENTCADMIUM SINGLE MATING END SINGLE CONTACT GROUPING
CQZGINSERT MATERIALPLASTIC ACETAL SINGLE MATING END
CRBJCONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CSCFTERMINAL TYPESCREW SINGLE MATING END SINGLE CONTACT GROUPING
CSGFCONTACT MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CSPTSHELL MATERIALCOPPER ALLOY
CSWMSHELL SURFACE TREATMENTCADMIUM
CTBCSHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE
CTHHSHELL MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE
CXCGINCLUDED CONTACT QUANTITY1 SINGLE MATING END SINGLE CONTACT GROUPING
CXCJBUSHING ACCOMMODATION HOLE SHAPEROUND
CXCLINCLUDED CONTACT TYPECOAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
THSDTHREAD SERIES DESIGNATORUNS

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8538907080 (NAICS 335314) Parts suitable for use solely or principally with the apparatus for heading 8535, 8536, 8537, nesoi
SITC : 77282 Parts of electrical apparatus for switching or protecting electrical circuits for making connections to or in electrical circuits, n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061680 - Elec wiring plugs etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top