Buy 16TM1018 Solenoid Electrical part by Tec Magnetics Co

Part Number:  16TM1018
Manufacturer:  tec magnetics co
NIIN:  000820968
Item Name :  solenoid electrical
CAGE Code:  18482
INC Code:  00310
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 16TM1018 (described as Solenoid Electrical), manufactured by Tec Magnetics Co with CAGE code 18482. This part is registered under NSN 5945-00-082-0968, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5945 Relays and Solenoids. Our verification process will confirm traceability through supporting identifiers including NIIN 00-082-0968, NCB code 00 (origin: USA), and INC 00310. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 16TM1018 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 16TM1018

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 16TM1018, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 16TM1018 with NSN 5945-00-082-0968, 5945000820968

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5945-00-082-0968

Item PartTypeName:

SOLENOID,ELECTRICAL

59450008209680N
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
10SD524-1623

Characteristics Data of NSN 5945-00-082-0968, 5945000820968

MRCCriteriaCharacteristic
AAQLBODY STYLECYLINDRICAL FRAME
ABKQCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH1.000 INCHES NOMINAL
ABKRCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH1.285 INCHES NOMINAL
ADAQBODY LENGTH2.750 INCHES MAXIMUM
ADZCENVIRONMENTAL PROTECTIONHUMIDITY PROOF
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.125 INCHES NOMINAL
AEHZMAXIMUM OPERATING TEMP125.0 DEG CELSIUS
AEXVMOUNTING BASE LENGTH1.250 INCHES NOMINAL
AEXWMOUNTING BASE WIDTH1.593 INCHES NOMINAL
AKNAINCLOSURE TYPEFULLY INCLOSED
APAFMAGNETIC COIL QUANTITY2
APCCELECTRICAL RESISTANCE8.00 OHMS NOMINAL AND 96.00 OHMS NOMINAL
APNPDUTY TYPECONTINUOUS
ASXHVOLTAGE RATING IN VOLTS30.0 DC MAXIMUM
AXHRMOUNTING FACILITY TYPE AND QUANTITY4 UNTHREADED HOLE
AXNPCURRENT RATING25.0 MILLIAMPERES MAXIMUM AND 3.0 AMPERES MAXIMUM
CNXTACTUATOR STROKE TYPEPULL AND PUSH
CNXWLINEAR FORCE DELIVERED1.00 OUNCES
CNXXPOWER TAKEOFF CONNECTION TYPEINTERNAL PLUNGER
CNYDENERGIZING STROKE MAXIMUM LENGTH0.266 INCHES
CQTMTERMINAL LOCATIONEND OPPOSITE ACTUATOR
CQYJMOUNTING FACILITY PATTERNFOUR POSITION RECTANGULAR
CWJKCASE MATERIALSTEEL
CWKCCASE SURFACE TREATMENTNICKEL
TESTTEST DATA DOCUMENT82577-970001 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI
TTQYTERMINAL TYPE AND QUANTITY3 SOLDER STUD

Schedule B & Trade

End Use : 21100 Industrial engines
Schedule B : 8412909080 (NAICS 333618) Parts of engines and motors, nesoi
SITC : 71899 Parts of reaction engines (except turbojet), linear acting hydraulic and pneumatic power engines and motors, and parts of engines and motors n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC Y
Classification Control U
MGMT_CTL -------
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 063100 - Solenoids/parts w/wo armatures
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top