Buy MS51990-105P Ring Lock Serrated part by Tecno Trade Srl

Part Number: MS51990-105P

Alternate P/N: MS51990105P

Manufacturer: tecno trade srl

NSN: 5365-00-405-7576

NIIN: 004057576

Item Name : ring lock serrated

CAGE Code: A0311

FSC: 5365 Bushings Rings Shims and Spacers

INC Code: 16013

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for MS51990-105P (described as Ring Lock Serrated), manufactured by Tecno Trade Srl with CAGE code A0311. This part is registered under NSN 5365-00-405-7576, classified in FSG 53 Hardware and Abrasives / FSC 5365 Bushings Rings Shims and Spacers. Our verification process will confirm traceability through supporting identifiers including NIIN 00-405-7576, NCB code 00 (origin: USA), and INC 16013. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MS51990-105P requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MS51990-105P

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part MS51990-105P, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number MS51990-105P with NSN 5365-00-405-7576, 5365004057576

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5365-00-405-7576 Item PartTypeName: RING,LOCK,SERRATED	5365	004057576	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
10013274-1	2	9	5

Characteristics Data of NSN 5365-00-405-7576, 5365004057576

MRC	Criteria	Characteristic
AARX	INSIDE DIAMETER	0.263 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
AAVL	PILOT DIAMETER	0.343 INCHES NOMINAL
ABKW	OVERALL HEIGHT	0.112 INCHES NOMINAL
ADGA	OVERALL OUTSIDE DIAMETER	0.395 INCHES MINIMUM AND 0.404 INCHES MAXIMUM
AWPM	OUTER SERRATION QUANTITY	24
AWPN	INNER SERRATION QUANTITY	17
AWQC	SIDE OUTER SERRATIONS OMITTED FOR CLOSE EDGE INSTALLATION	TWO SIDES
MATT	MATERIAL	STEEL COMP 1117
SFTT	SURFACE TREATMENT	CADMIUM AND CHROMATE
ZZZK	SPECIFICATION/STANDARD DATA	81343-AS51990-105P PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	D
Classification Control	U
MGMT_CTL	T22bkx-
Quantity per pack	1
Repariability	This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	Q - 70.0
NMFC:	095190 - Hardware, noi sub 9
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	713 - Metal hardware