Buy 01004 Connecting Rod Pist part by Tecumseh Products Co

Part Number: 01004

Manufacturer: tecumseh products co

NSN: 2805-00-358-3341

NIIN: 003583341

Item Name : connecting rod pist

CAGE Code: 59431

FSC: 2805 Gasoline Reciprocating Engines Except Aircraft and Components

INC Code: 60266

Country: USA

NCB Code: 00

FSG: 28 Engines Turbines and Components

We've received your request for 01004 (described as Connecting Rod Pist), manufactured by Tecumseh Products Co with CAGE code 59431. This part is registered under NSN 2805-00-358-3341, classified in FSG 28 Engines Turbines and Components / FSC 2805 Gasoline Reciprocating Engines Except Aircraft and Components. Our verification process will confirm traceability through supporting identifiers including NIIN 00-358-3341, NCB code 00 (origin: USA), and INC 60266. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 01004 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 01004

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 01004, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 01004 with NSN 2805-00-358-3341, 2805003583341

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
2805-00-358-3341 Item PartTypeName: CONNECTING ROD,PISTON	2805	003583341		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
01004	5	9	5

Characteristics Data of NSN 2805-00-358-3341, 2805003583341

MRC	Criteria	Characteristic
AAGR	CROSS-SECTIONAL SHAPE STYLE	I-SECTION TYPE
AARN	FABRICATION METHOD	CAST
AKEU	SHAFT CONNECTING END STYLE	2 BOLT 45 DEGREES
AXPW	END THICKNESS	1.125 INCHES NOMINAL
BQBN	EDGE RADIUS	0.555 INCHES NOMINAL
BQBP	END HOLE INSIDE DIAMETER	0.750 INCHES NOMINAL
BQBT	PISTON CONNECTING END BEARING	NOT INCLUDED
BQBY	PISTON CONNECTING END LUBRICATION DRILL FEATURE	INCLUDED
BQBZ	PISTON CONNECTING END LUBRICATION METHOD	SPLASH
BQCB	SHAFT CONNECTING END BEARING	NOT INCLUDED
BQCC	SHAFT CONNECTING END HOLE INSIDE DIAMETER	1.625 INCHES NOMINAL
BQCF	SHAFT CONNECTING END EDGE RADIUS	1.075 INCHES NOMINAL
BQCG	SHAFT CONNECTING END WIDTH	2.925 INCHES NOMINAL
BQCH	SHAFT CONNECTING END THICKNESS	1.125 INCHES NOMINAL
BQCZ	SHAFT CONNECTING END LUBRICATION DRILL FEATURE	NOT INCLUDED
BQDB	SHAFT CONNECTING END LUBRICATION METHOD	FORCED-FEED
BRNG	CENTER TO CENTER EFFECTIVE LENGTH	5.000 INCHES NOMINAL
BRNH	BODY WIDTH AT PISTON CONNECTING END	0.750 INCHES NOMINAL
BRNJ	BODY WIDTH AT SHAFT CONNECTING END	0.750 INCHES NOMINAL
BRNK	BODY THICKNESS AT PISTON CONNECTING END	0.750 INCHES NOMINAL
BRNL	BODY THICKNESS AT SHAFT CONNECTING END	0.910 INCHES NOMINAL
BXYS	PISTON END CONNECTION STYLE	SMALL ENGINE AND AUTOMOTIVE STANDARD
MATT	MATERIAL	ALUMINUM ALLOY

Schedule B & Trade

End Use : 21100	Industrial engines
Schedule B : 8409918000 (NAICS 333618)	Parts for spark-ignition internal combustion piston engines, nesoi
SITC : 71391	Parts, n.E.S, suitable for use solely or principally with spark-ignition internal combustion piston engines

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	Y
Classification Control	U
MGMT_CTL	J2200x-
Quantity per pack	1
Repariability	Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. refer to appropriate manuals or directives for specific instructions.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	U - 50.0
NMFC:	104340 - Bars/rods noi i/s
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	593 - Motors and parts, (machinery and parts),(less than 35 feet)