Buy LF-5K Meter Gas Volume Dr part by Teledyne Instruments Inc

Part Number: LF-5K

Alternate P/N: LF5K

Manufacturer: teledyne instruments inc

NSN: 6680-01-004-6612

NIIN: 010046612

Item Name : meter gas volume dr

CAGE Code: 07682

INC Code: 08262

Country: USA

NCB Code: 01

We've received your request for LF-5K (described as Meter Gas Volume Dr), manufactured by Teledyne Instruments Inc with CAGE code 07682. This part is registered under NSN 6680-01-004-6612, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-004-6612, NCB code 01 (origin: USA), and INC 08262. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your LF-5K requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for LF-5K

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part LF-5K, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6680-01-004-6612, 6680010046612

MRC	Criteria	Characteristic
MRC	Decoded Requirement	Clear Text Reply
ZZZY	Reference Number Differentiating Characteristics	AS DIFFERENTIATED BY THE MATERIAL
FEAT	Special Features	LOW FLOW RATE MEASUREMENT,READABLE TO 0.5 % OF RANGE, ACCURATE WITHIN 2 % FROM 0.1 PISA TO 250 PSIG, TRANSDUCER COMPLETELY EXTERNAL TO FLOW SYSTEM,SOLID STATE METER CIRCUITRY, NON-LINER,RECORDABLE DC OUTPUT SIGNAL, 0 TO 5000 CC/MIN FLOW RANGE, THERMAL OPERATING TECHNIQUE, TEMP RANGE, UP TO 100 DEG. C, AMBIENT TEMP, 0 TO 40 DEG. C, CALIBRATED FOR AIR ONLY, 115 VOLTS AC, 50/60 CYCLES, 15 WATTS, DIM., 7.75 X 5.75 X 5.75 IN., 0.1 PSIAS TO 250 PSIG OPERATING PRESSURES, UP TO 100 DEG. C FLOW TEMP, AMBIENT TEMP 0 TO 40 DEG. C, 0.5 % FULL SCALE SENSITIVITY, RESPONSE TIME APPROX. 30 SEC., OUTPUT APPROX. 0-3 MILLI V DC INTO HIGH IMPEDENCE, MONEL CONSTRUCTION

Schedule B & Trade

End Use : 21160	Measuring, testing, control instruments
Schedule B : 9028100000 (NAICS 334514)	Gas meters
SITC : 87311	Gas meters

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown