Buy 1702108 Filter Band Pass part by Teledyne Wireless Inc

Part Number: 1702108

Manufacturer: teledyne wireless inc

NSN: 5915-01-090-1591

NIIN: 010901591

Item Name : filter band pass

CAGE Code: 24022

FSC: 5915 Filters and Networks

INC Code: 00209

Country: USA

NCB Code: 01

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for 1702108 (described as Filter Band Pass), manufactured by Teledyne Wireless Inc with CAGE code 24022. This part is registered under NSN 5915-01-090-1591, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5915 Filters and Networks. Our verification process will confirm traceability through supporting identifiers including NIIN 01-090-1591, NCB code 01 (origin: USA), and INC 00209. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 1702108 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 1702108

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 1702108, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 1702108 with NSN 5915-01-090-1591, 5915010901591

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5915-01-090-1591 Item PartTypeName: FILTER,BAND PASS	5915	010901591	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
1702108	5	1	5

Characteristics Data of NSN 5915-01-090-1591, 5915010901591

MRC	Criteria	Characteristic
ADAQ	BODY LENGTH	1.696 INCHES NOMINAL
ADAT	BODY WIDTH	0.500 INCHES NOMINAL
ADAU	BODY HEIGHT	0.875 INCHES NOMINAL
AEBY	DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	0.588 INCHES NOMINAL
AEHA	DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	0.220 INCHES NOMINAL
AFGA	OPERATING TEMP RANGE	-54.0 TO 110.0 DEG CELSIUS
AHAJ	REFERENCE FREQUENCY PER FUNCTION	3.3 GIGAHERTZ BLANK
AHAU	INPUT IMPEDANCE PER FUNCTION W/LOAD	50.0 OHMS BLANK
AHAV	OUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT	50.0 OHMS BLANK
AHBN	INPUT TERMINAL MANUFACTURER CODE	24022
AHBP	INPUT TERMINAL IDENTIFICATION	SMA-JACK
AHBS	OUTPUT TERMINAL MANUFACTURER CODE	24022
AHBT	OUTPUT TERMINAL IDENTIFICATION	SMA-JACK
AHBZ	VOLTAGE STANDING WAVE RATIO PER FUNCTION	1.3 BLANK
AKEJ	MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR	UNC
AKNA	INCLOSURE TYPE	ENCASED
AXHR	MOUNTING FACILITY TYPE AND QUANTITY	4 THREADED HOLE
CQDR	INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS	0.5 BLANK
CQDW	FUNCTIONAL TERMINAL TYPE AND QUANTITY	1 CONNECTOR,RECEPTACLE INPUT 1ST FUNCTION
CQDW	FUNCTIONAL TERMINAL TYPE AND QUANTITY	1 CONNECTOR,RECEPTACLE OUTPUT 2ND FUNCTION
CQFC	SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION	900.00 MEGAHERTZ BLANK AND 2.58 GIGAHERTZ BLANK AND 4.08 GIGAHERTZ BLANK AND 12.40 GIGAHERTZ BLANK
CQJX	NOMINAL THREAD SIZE	0.086 INCHES
CQRG	BODY MATERIAL	METAL
CRBB	FREQUENCY BAND WIDTH PER FUNCTION	2.58 GIGAHERTZ BLANK AND 4.08 GIGAHERTZ BLANK
CRBC	DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS	40.0 MINIMUM BLANK AND 1.0 MAXIMUM BLANK 1ST FUNCTION
CRBN	VOLTAGE STANDING WAVE RATIO FREQUENCY LIMITS PER FUNCTION	2.58 GIGAHERTZ BLANK AND 4.08 GIGAHERTZ BLANK
STYL	STYLE DESIGNATOR	RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE

Schedule B & Trade

End Use : 41210	Stereo equipment, etc.
Schedule B : 8527995030 (NAICS 334310)	Reception apparatus, nesoi
SITC : 76289	Radiobroadcast receivers, not combined with sound recording or reproducing apparatus nor with a clock, etc., n.E.S.

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	9b-----
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	P - 77.5
NMFC:	061990 - Electrical equip: filters
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	593 - Motors and parts, (machinery and parts),(less than 35 feet)