Buy CS-37S6C-12 Switch Radio Freque part by Teledyne Wireless Inc

Part Number:  CS-37S6C-12
Alternate P/N:  CS37S6C12
Manufacturer:  teledyne wireless inc
NIIN:  010917026
Item Name :  switch radio freque
CAGE Code:  24022
INC Code:  05298
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for CS-37S6C-12 (described as Switch Radio Freque), manufactured by Teledyne Wireless Inc with CAGE code 24022. This part is registered under NSN 5985-01-091-7026, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5985 Antennas Waveguides and Related Equipment. Our verification process will confirm traceability through supporting identifiers including NIIN 01-091-7026, NCB code 01 (origin: USA), and INC 05298. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your CS-37S6C-12 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for CS-37S6C-12

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part CS-37S6C-12, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number CS-37S6C-12 with NSN 5985-01-091-7026, 5985010917026

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5985-01-091-7026

Item PartTypeName:

SWITCH,RADIO FREQUENCY TRANSMISS

59850109170260P
CIICHCCESDPMICCriticalityENAC
U G0
Part NumberISCRNVCRNCCHCCMSDSSADC
2131900-3695

Characteristics Data of NSN 5985-01-091-7026, 5985010917026

MRCCriteriaCharacteristic
AAQLBODY STYLERECTANGULAR
ABHPOVERALL LENGTH2.850 INCHES NOMINAL
ABKWOVERALL HEIGHT1.970 INCHES NOMINAL
ABMKOVERALL WIDTH1.310 INCHES NOMINAL
ACZBFREQUENCY RATING0.0 GIGAHERTZ MINIMUM AND 4.0 GIGAHERTZ MAXIMUM 1ST FREQUENCY VOLTAGE STANDING WAVE RATIO
ACZBFREQUENCY RATING0.0 GIGAHERTZ MINIMUM AND 7.0 GIGAHERTZ MAXIMUM 1ST FREQUENCY INSERTION LOSS REFERENCE
ACZBFREQUENCY RATING4.0 GIGAHERTZ MINIMUM AND 12.4 GIGAHERTZ MAXIMUM 2ND FREQUENCY VOLTAGE STANDING WAVE RATIO
ACZBFREQUENCY RATING7.0 GIGAHERTZ MINIMUM AND 12.4 GIGAHERTZ MAXIMUM 2ND FREQUENCY INSERTION LOSS REFERENCE
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.149 INCHES NOMINAL
AEEASWITCH TYPETRANSFER
AFGAOPERATING TEMP RANGE0.0 TO 71.0 DEG CELSIUS
AHTWVOLTAGE STANDING WAVE RATIO1.20 1ST
AHTWVOLTAGE STANDING WAVE RATIO1.40 2ND
AHTXINSERTION LOSS IN DECIBELS0.20 1ST
AHTXINSERTION LOSS IN DECIBELS0.40 2ND
AHUCCOAXIAL CONNECTOR SERIES DESIGNATIONSMA
AHUDCONNECTOR END DESIGNFEMALE
AKNVMINIMUM CROSSTALK RATING IN DECIBELS60.0 SINGLE
AKPCACTUATOR OPERATING METHODSOLID STATE
AKPEACTUATOR CURRENT TYPE AND RATING IN AMPS0.2 DC NOMINAL
AKPJACTUATOR VOLTAGE IN VOLTS28.0 NOMINAL
AKPPSWITCHING TIME25.0 MILLISECONDS
AKPQSWITCH RETURN MECHANISM TYPELATCHING
AXHRMOUNTING FACILITY TYPE AND QUANTITY3 UNTHREADED HOLE
CQYJMOUNTING FACILITY PATTERNISOSCELES TRIANGLE SINGLE MOUNTING FACILITY PATTERN
MATTMATERIALALUMINUM BODY
MATTMATERIALCOPPER ALLOY CONTACT(S)
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
PRMTPRECIOUS MATERIALGOLD
SFTTSURFACE TREATMENTGOLD CONTACT(S) OUTSIDE SURFACES
SFTTSURFACE TREATMENTNICKEL BODY OUTSIDE SURFACES
TTQYTERMINAL TYPE AND QUANTITY6 PIN AND 4 RECEPTACLE,COAXIAL
ZZZKSPECIFICATION/STANDARD DATA55974-2131900 GOVERNMENT SPECIFICATION

Schedule B & Trade

End Use : 21400 Telecommunications equipment
Schedule B : 8529109000 (NAICS 334220) Antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8525 to 8528, nesoi
SITC : 76493 Parts of television receivers, radiobroadcast receivers, transmission apparatus for radio telephony, telegraphy, broadcasting or television etc.

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC G - Item contains gold.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: Z - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top