Buy CS318642V4-20 Screw Close Toleran part by Textron Fastening Systems Ltd

Part Number: CS318642V4-20

Alternate P/N: CS318642V420

Manufacturer: textron fastening systems ltd

NSN: 5305-00-487-5261

NIIN: 004875261

Item Name : screw close toleran

CAGE Code: 93907

FSC: 5305 Screws

INC Code: 29294

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for CS318642V4-20 (described as Screw Close Toleran), manufactured by Textron Fastening Systems Ltd with CAGE code 93907. This part is registered under NSN 5305-00-487-5261, classified in FSG 53 Hardware and Abrasives / FSC 5305 Screws. Our verification process will confirm traceability through supporting identifiers including NIIN 00-487-5261, NCB code 00 (origin: USA), and INC 29294. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your CS318642V4-20 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for CS318642V4-20

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part CS318642V4-20, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 5305-00-487-5261, 5305004875261

MRC	Criteria	Characteristic
AAJF	THREAD DIRECTION	RIGHT-HAND
AASB	FASTENER LENGTH	1.612 INCHES MINIMUM AND 1.642 INCHES MAXIMUM
AHYM	NOMINAL THREAD DIAMETER	0.250 INCHES
CQBC	MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
CMLP	THREAD QUANTITY PER INCH	28
AAJD	THREAD CLASS	3A
AASA	THREAD LENGTH	0.352 INCHES MINIMUM AND 0.402 INCHES MAXIMUM
AASK	HEAD STYLE	FLAT COUNTERSUNK
AAUR	GRIP DIAMETER	0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
ABQZ	INTERNAL DRIVE STYLE	OFFSET CRUCIFORM (TORQUE SET)
ANEE	GRIP LENGTH	1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM
CRSQ	COUNTERSINK ANGLE	59.75 DEGREES MINIMUM AND 60.25 DEGREES MAXIMUM
CSYM	SURFACE FINISH	32.0 MICROINCHES GRIP
MATT	MATERIAL	TITANIUM ALLOY UNS R54520 OVERALL
THSD	THREAD SERIES DESIGNATOR	UNF
AASL	HEAD DIAMETER	0.412 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	NAS 621, 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL

Schedule B & Trade

End Use : 12300	Finished metal shapes
Schedule B : 8109900000 (NAICS 331491)	Zirconium and articles thereof nesoi
SITC : 69987	Zirconium, wrought, and articles of zirconium, n.E.S.

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown