Buy SCB16458B Collar Shaft part by The Okonite Company

Part Number: SCB16458B

Manufacturer: the okonite company

NSN: 3040-00-399-7277

NIIN: 003997277

Item Name : collar shaft

CAGE Code: 80063

FSC: 3040 Miscellaneous Power Transmission Equipment

INC Code: 13743

Country: USA

NCB Code: 00

FSG: 30 Mechanical Power Transmission Equipment

We've received your request for SCB16458B (described as Collar Shaft), manufactured by The Okonite Company with CAGE code 80063. This part is registered under NSN 3040-00-399-7277, classified in FSG 30 Mechanical Power Transmission Equipment / FSC 3040 Miscellaneous Power Transmission Equipment. Our verification process will confirm traceability through supporting identifiers including NIIN 00-399-7277, NCB code 00 (origin: USA), and INC 13743. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your SCB16458B requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for SCB16458B

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part SCB16458B, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number SCB16458B with NSN 3040-00-399-7277, 3040003997277

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3040-00-399-7277 Item PartTypeName: COLLAR,SHAFT	3040	003997277		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
CA143B16458	2	9	5

Characteristics Data of NSN 3040-00-399-7277, 3040003997277

MRC	Criteria	Characteristic
ABKV	OUTSIDE DIAMETER	1.247 INCHES MINIMUM AND 1.253 INCHES MAXIMUM
ABNM	THICKNESS	0.560 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
ABXV	BORE DIAMETER	0.2500 INCHES MINIMUM AND 0.2520 INCHES MAXIMUM
AHYF	SECURING HOLE QUANTITY	2
AHYG	ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG	90.0
CQBP	SCREW THREAD SERIES DESIGNATOR AND LOCATION	SINGLE HOLE UNF
CQKB	SECURING HOLE TYPE AND LOCATION	THREADED SINGLE HOLE
CRWB	NOMINAL THREAD SIZE AND LOCATION	0.190 INCHES SINGLE HOLE
FEAT	SPECIAL FEATURES	ONE BEARING FACE GROOVED 0.125 IN. DEEP BY 0.062 IN. WIDTH LOCATED PARALLEL TO THE FIRST SECURING HOLE AND EXTENDING ACROSS ENTIRE FACE,0.375 IN. DEEP BY 0.062 IN. WIDE SLOT IN OUTER PERIPHERY LOCATED 45 DEG FROM GROOVE ONN BEARING FACE,3 0
MATT	MATERIAL	STEEL COMP 202 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 310 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR ST
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
STYL	STYLE DESIGNATOR	PLAIN ROUND

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL:	W - Rating variable
LTL:	W - Rating variable
NMFC:	126880 - Power trans shafting pulleys
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	593 - Motors and parts, (machinery and parts),(less than 35 feet)