Buy C3252 Coil Electrical part by Thomas Electronics Inc

Part Number:  C3252
Manufacturer:  thomas electronics inc
NIIN:  007386091
Item Name :  coil electrical
CAGE Code:  99409
INC Code:  32494
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for C3252 (described as Coil Electrical), manufactured by Thomas Electronics Inc with CAGE code 99409. This part is registered under NSN 5950-00-738-6091, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5950 Coils and Transformers. Our verification process will confirm traceability through supporting identifiers including NIIN 00-738-6091, NCB code 00 (origin: USA), and INC 32494. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your C3252 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for C3252

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part C3252, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number C3252 with NSN 5950-00-738-6091, 5950007386091

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5950-00-738-6091

Item PartTypeName:

COIL,ELECTRICAL

5950007386091P
CIICHCCESDPMICCriticalityENAC
U
Part NumberISCRNVCRNCCHCCMSDSSADC
10050215625

Characteristics Data of NSN 5950-00-738-6091, 5950007386091

MRCCriteriaCharacteristic
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABKQCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH1.875 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
ABKRCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH2.125 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
ABTBMOUNTING HOLE DIAMETER0.156 INCHES NOMINAL SINGLE GROUP
ACYVINDUCTANCE RATING4.80 MILLIHENRIES NOMINAL SINGLE COMPONENT 2ND WINDING
ACYVINDUCTANCE RATING6.10 MILLIHENRIES NOMINAL SINGLE COMPONENT 3RD WINDING
ACZBFREQUENCY RATING1.0 KILOHERTZ NOMINAL SINGLE COMPONENT
ADARBODY OUTSIDE DIAMETER2.240 INCHES NOMINAL
AKDXWINDING QUANTITY5 SINGLE COMPONENT
AKNAINCLOSURE TYPEFULLY INCLOSED
AKPVMOUNTING FACILITY QUANTITY8 SINGLE GROUP
BKPLRATING METHODELECTRICAL SINGLE COMPONENT ALL WINDING
CRBZWINDING OPERATING CURRENT31.0 MILLIAMPERES DC MAXIMUM SINGLE COMPONENT 3RD WINDING
CRBZWINDING OPERATING CURRENT33.0 MILLIAMPERES DC MAXIMUM SINGLE COMPONENT 1ST WINDING
CRGSDC RESISTANCE RATING IN OHMS500.000 SINGLE COMPONENT 5TH WINDING
CRGSDC RESISTANCE RATING IN OHMS51.000 SINGLE COMPONENT 1ST WINDING
CRGSDC RESISTANCE RATING IN OHMS58.000 SINGLE COMPONENT 3RD WINDING
TTQYTERMINAL TYPE AND QUANTITY10 WIRE LEAD
ACYVINDUCTANCE RATING1350.00 MILLIHENRIES NOMINAL SINGLE COMPONENT 5TH WINDING
ACYVINDUCTANCE RATING4.80 MILLIHENRIES NOMINAL SINGLE COMPONENT 1ST WINDING
ACYVINDUCTANCE RATING6.10 MILLIHENRIES NOMINAL SINGLE COMPONENT 4TH WINDING
ADAQBODY LENGTH3.500 INCHES NOMINAL
AXGYMOUNTING METHODFLANGE AND UNTHREADED HOLE SINGLE GROUP
CRBZWINDING OPERATING CURRENT31.0 MILLIAMPERES DC MAXIMUM SINGLE COMPONENT 4TH WINDING
CRBZWINDING OPERATING CURRENT33.0 MILLIAMPERES DC MAXIMUM SINGLE COMPONENT 2ND WINDING
CRBZWINDING OPERATING CURRENT34.0 AMPERES DC MAXIMUM SINGLE COMPONENT 5TH WINDING
CRGSDC RESISTANCE RATING IN OHMS51.000 SINGLE COMPONENT 2ND WINDING
CRGSDC RESISTANCE RATING IN OHMS58.000 SINGLE COMPONENT 4TH WINDING

Schedule B & Trade

End Use : 20000 Generators, accessories
Schedule B : 8504500000 (NAICS 334416) Inductors, nesoi
SITC : 77125 Electrical inductors, n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 063420 - Transformers, noi, or transformer par
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 595 - Transformer, (machinery and parts),(less than 35 feet)

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top