Buy 17003-01 Switch Rotary part by Thomson Training And Simulation Inc

Part Number: 17003-01

Alternate P/N: 1700301

Manufacturer: thomson training and simulation inc

NSN: 5930-01-214-8546

NIIN: 012148546

Item Name : switch rotary

CAGE Code: 82932

FSC: 5930 Switches

INC Code: 02134

Country: USA

NCB Code: 01

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for 17003-01 (described as Switch Rotary), manufactured by Thomson Training And Simulation Inc with CAGE code 82932. This part is registered under NSN 5930-01-214-8546, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5930 Switches. Our verification process will confirm traceability through supporting identifiers including NIIN 01-214-8546, NCB code 01 (origin: USA), and INC 02134. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 17003-01 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 17003-01

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 17003-01, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 17003-01 with NSN 5930-01-214-8546, 5930012148546

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5930-01-214-8546 Item PartTypeName: SWITCH,ROTARY	5930	012148546	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			S
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
1630A-101-10N-90F-101-2NY	5	9	5

Characteristics Data of NSN 5930-01-214-8546, 5930012148546

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	2A SINGLE MOUNTING FACILITY
AASA	THREAD LENGTH	0.437 INCHES NOMINAL SINGLE MOUNTING FACILITY
ABFE	HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION	SHOCK PROOF AND VIBRATION PROOF
ABHP	OVERALL LENGTH	3.082 INCHES NOMINAL
ABNB	FIRST FLAT LENGTH	0.250 INCHES NOMINAL ALL ACTUATORS
ABNC	FLAT HEIGHT	0.093 INCHES NOMINAL 2ND ACTUATOR
ABNC	FLAT HEIGHT	0.216 INCHES NOMINAL 1ST ACTUATOR
ABWV	SHAFT DIAMETER	0.125 INCHES NOMINAL 2ND ACTUATOR
ABWV	SHAFT DIAMETER	0.250 INCHES NOMINAL 1ST ACTUATOR
ABXF	SHAFT LENGTH	0.375 INCHES NOMINAL ALL ACTUATORS
ADAV	OVERALL DIAMETER	1.000 INCHES NOMINAL
AFBH	INDIVIDUAL SECTION QUANTITY	2
AFDC	NONTURN DEVICE TYPE	SLOTTED BUSHING AT 3:00 OCLOCK
AFGA	OPERATING TEMP RANGE	-65.0 TO 85.0 DEG CELSIUS
AJZE	SWITCH CONTACT BASIC DESIGN	NONPILE-UP SYMMETRICAL
AKPX	POLE QUANTITY	1 EACH SECTION FRONT
AKPY	THROW QUANTITY	10 1ST SECTION REAR
AKPY	THROW QUANTITY	2 2ND SECTION REAR
AXGY	MOUNTING METHOD	THREADED BUSHING SINGLE MOUNTING FACILITY
CQJX	NOMINAL THREAD SIZE	0.375 INCHES SINGLE MOUNTING FACILITY
CQMK	CONTACT VOLTAGE RATING IN VOLTS	115.0 AC AT SEA LEVEL
CQMK	CONTACT VOLTAGE RATING IN VOLTS	30.0 DC AT SEA LEVEL
CQTH	ROTOR THROUGH CONNECTION QUANTITY	1 EACH SECTION
CRJH	SWITCH ACTUATOR INDEXING POSITION QUANTITY	10 1ST ACTUATOR
CRJH	SWITCH ACTUATOR INDEXING POSITION QUANTITY	2 2ND ACTUATOR
CRSJ	SHAFT TYPE	ROUND,FLATTED 2ND ACTUATOR
CRSJ	SHAFT TYPE	ROUND,FLATTED,THREADED HOLE 1ST ACTUATOR
CSCF	TERMINAL TYPE	TAB,SOLDER LUG
CSHW	CONTACT SWITCHING ACTION	BREAKS BEFORE MAKES EACH SECTION REAR
CSLC	SWITCH ACTUATOR POSITIONING INCREMENT	30.0 DEGREES 1ST ACTUATOR
CSLC	SWITCH ACTUATOR POSITIONING INCREMENT	90.0 DEGREES 2ND ACTUATOR
CTDN	SWITCH ACTUATOR STOP DEVICE TYPE	ADJUSTABLE STOP 1ST ACTUATOR
CTDN	SWITCH ACTUATOR STOP DEVICE TYPE	FIXED STOP 2ND ACTUATOR
CTHF	CONTACT LOAD CURRENT RATING	1.5 AMPERES RESISTIVE LOAD AND 100.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL
CTHF	CONTACT LOAD CURRENT RATING	3.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL
PMLC	PRECIOUS MATERIAL AND LOCATION	CONTACTS SILVER
PRMT	PRECIOUS MATERIAL	SILVER
STYL	STYLE DESIGNATOR	TAP,CIRCULAR,BUSHING MOUNT
THSD	THREAD SERIES DESIGNATOR	UNEF SINGLE MOUNTING FACILITY

Schedule B & Trade

End Use : 20005	Electric apparatus
Schedule B : 8536509025 (NAICS 335931)	Switches, rotary, rated at over 5 a, for a voltage not exceeding 1, 000 volts
SITC : 77255	Switches for electrical apparatus, n.E.S., for voltages not exceeding 1, 000 volts

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	S - Item contains silver.

NSN Management Codes

AAC	X
Classification Control	U
MGMT_CTL	9b-----
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	P - 77.5
NMFC:	061300 - Circuit breaker/switch noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	72D - Communications/electronics, other than sigint/ew or comsec repair parts and components