Buy CC45117 Cam Follower Needle part by Timken Aerospace Inc

Part Number: CC45117

Manufacturer: timken aerospace inc

NSN: 3110-00-471-1787

NIIN: 004711787

Item Name : cam follower needle

CAGE Code: 60380

FSC: 3110 Bearings Antifriction Unmounted

INC Code: 00040

Country: USA

NCB Code: 00

FSG: 31 Bearings

We've received your request for CC45117 (described as Cam Follower Needle), manufactured by Timken Aerospace Inc with CAGE code 60380. This part is registered under NSN 3110-00-471-1787, classified in FSG 31 Bearings / FSC 3110 Bearings Antifriction Unmounted. Our verification process will confirm traceability through supporting identifiers including NIIN 00-471-1787, NCB code 00 (origin: USA), and INC 00040. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your CC45117 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for CC45117

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part CC45117, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number CC45117 with NSN 3110-00-471-1787, 3110004711787

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3110-00-471-1787 Item PartTypeName: CAM FOLLOWER,NEEDLE BEARING	3110	004711787	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
953693-1	2	2	1

Characteristics Data of NSN 3110-00-471-1787, 3110004711787

MRC	Criteria	Characteristic
ABHP	OVERALL LENGTH	0.8870 INCHES MINIMUM AND 0.9230 INCHES MAXIMUM
ADGA	OVERALL OUTSIDE DIAMETER	0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM
AGAV	END ITEM IDENTIFICATION	RF-4C ACFT
AGRJ	STUD DIAMETER	0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM
AGVT	OUTER RING WIDTH	0.2760 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM
AGXF	STUD LENGTH	0.6050 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM
FEAT	SPECIAL FEATURES	SHAFT IS UNTHREADED WITH CLOSE TOLERANCES TO BE PRESSED INTO PLACE,FREE RUNNING AND SMOOTH TO HAND FEEL. INTEGRALLY SHEELDED
LBMA	LUBRICATION MATERIAL	GREASE
LMDC	LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION	MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATT	MATERIAL	STEEL COMP 420 WASHER
MATT	MATERIAL	STEEL COMP 440C OUTER RING
MATT	MATERIAL	STEEL COMP 440C ROLLER
MATT	MATERIAL	STEEL COMP E52100 STUD
SFTT	SURFACE TREATMENT	CADMIUM SHAFT
STYL	STYLE DESIGNATOR	CAM FOLLOWER

Schedule B & Trade

End Use : 21180	Industrial machines, other
Schedule B : 8482400000 (NAICS 332991)	Needle roller bearings
SITC : 74640	Needle roller bearings

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	V
Classification Control	U
MGMT_CTL	9b-----
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL:	P - 77.5
LTL:	P - 77.5
NMFC:	114820 - Bearings/bushings noi ball/roller
SHC:	Z - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	742 - Bearings